Wiper Arm

[Doug D.]

Anybody know how to properly remove windshield wiper arm from a humvee?

 

[Coug]

It should pull straight off with a little effort. Nothing locking it onto the shaft.

 

[SmartDrug]

Mine has a little clip towards the rear of the vehicle, it needs to be lifted out of the way, then a straight pull.

 

[Vapor Trail]

There's a clip back there that has to be pushed sideways and then pry off the arm

 

[HoveringHMMWV]

My technique for removing the wiper arms is to use a paint lid removal tool (usually free at your favorite big box store). It allows you to disengage the clip underneath while pulling the wiper arm off with the free hand. It's ambidextrous but only comes in one finish.
- HoveringHMMWV

 

[Doug D.]

My technique for removing the wiper arms is to use a paint lid removal tool (usually free at your favorite big box store). It allows you to disengage the clip underneath while pulling the wiper arm off with the free hand. It's ambidextrous but only comes in one finish.
- HoveringHMMWV

View attachment 894944

thanks for all the info!

 

[Pstyckiewicz]

Any suggestions on how to get the extended version off? I loosen the Allen wrench screw and tried pulling…. They are stuck. Any suggestions?

 

[Coug]

Any suggestions on how to get the extended version off? I loosen the Allen wrench screw and tried pulling…. They are stuck. Any suggestions?

pull harder.
Or sometimes they are held on with a little loctite, and have to be heated up to remove.
But mostly just pull harder.

I think for my short extensions that are just a press fit and no set screws I used 2 rolling head prybars on opposite sides to get them to come off.