• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Wiper electric trouble

samurai

New member
69
1
0
Location
nice france
hello friends

i have a problem with my wiper blade switch
1)sometimes wiper blade working alone
2)yesterday i have a little smoke emission near the switch

i think there is a problem with the switch ,this one is use for turn signal , wiper blade and light control

at this time i have retired the fuse to prevent a damage

i need your help to find the good part

can you give me a link ?

i 'am not sure this one is good for my cucv m1009

Windshield Wiper and Windshield Washer Switch by ACDelco (part#D6354A) / Switches

CUCV Turn Signal Switch - CUCV Electric


thanks for your help

just one photo from my cucv
 

Attachments

Last edited by a moderator:

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
There are three parts that you are looking at.

The turn signal switch

BWD S3233 - Directional Signal Switch | O'Reilly Auto Parts


the wiper lever
Dorman Help! 49273 - TURN SIGNAL LEVER | O'Reilly Auto Parts

and the wiper switch

http://www.oreillyauto.com/site/c/detail/BWD0/S3465/02108.oap?year=1984&make=Chevrolet&model=K30%2BPickup%2B4WD&vi=1053021&ck=Search_wiper+switch_1053021_234&keyword=wiper+switch



The "lever" screws into the turn signal switch. TM 9-2320-289-20, Chapter 4-14 tells how to remove the lever.

The TM 9-2320-289-34 covers replacing the "directional signal" switch. Chapter 4-14

BUT how to replace the wiper switch is not covered....imagine that.....
 
Last edited:

samurai

New member
69
1
0
Location
nice france
big thanks for your message

i thinks the problem is the wipper switch

tell me if the link you give to me is ok for my vehicle

i will try to but it

if you know a shop who accept paypal it's better for me


bye


eric
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
The GM part number from the TM 9-2320-289-34P parts manual is:

7840274

Googling that number comes up with this link

7840274 - GM SWITCH

Looking it up on www.napaonline.com

NAPA AUTO PARTS

Part number ECH WS6040

Can't help you with the Paypal issue.

Is there a local part house that can cross-reference the part numbers?

GM 7840274
ECH WS6040
BWD S3465
 

Skinny

Well-known member
2,130
488
83
Location
Portsmouth, NH
RockAuto.com accepts PayPal

I would also be checking for a short circuit or a jammed up wiper motor which would cause anything to smoke.
 

Nico

Member
329
15
18
Location
Germany, Hamburg
There are three parts that you are looking at.

The turn signal switch

BWD S3233 - Directional Signal Switch | O'Reilly Auto Parts


the wiper lever
Dorman Help! 49273 - TURN SIGNAL LEVER | O'Reilly Auto Parts

and the wiper switch

http://www.oreillyauto.com/site/c/detail/BWD0/S3465/02108.oap?year=1984&make=Chevrolet&model=K30%2BPickup%2B4WD&vi=1053021&ck=Search_wiper+switch_1053021_234&keyword=wiper+switch



The "lever" screws into the turn signal switch. TM 9-2320-289-20, Chapter 4-14 tells how to remove the lever.

The TM 9-2320-289-34 covers replacing the "directional signal" switch. Chapter 4-14

BUT how to replace the wiper switch is not covered....imagine that.....


got a Problem too,
when i Switch Off the wiper it freezes in that Position (mostly in the middle of the windshield)
would a New wiper Switch fix that Problem or is it a relay defect?
 

cpf240

Active member
1,479
5
38
Location
Free in Northern Idaho
There is a "park switch" on the wiper motor assembly. Disconnect the two plugs on the pump portion of the assembly, pull off the cover and clean all the contacts. I found a broken wire inside mine, and after fixing that and cleaning the motors' ground strap, it works much better. Oh, and you may want to consider bypassing the noise filter capacitors.
 

Nico

Member
329
15
18
Location
Germany, Hamburg
There is a "park switch" on the wiper motor assembly. Disconnect the two plugs on the pump portion of the assembly, pull off the cover and clean all the contacts. I found a broken wire inside mine, and after fixing that and cleaning the motors' ground strap, it works much better. Oh, and you may want to consider bypassing the noise filter capacitors.
hi cpf240!
i did as you said and it works just fine.
i sprayed all the contacts, motor, joints with wd-40 and the interval works again plus the wiper is twice that fast as before.

thank you again, for that helpfull advice.
regards
nico
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks