• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Wire loom tape?

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,038
5,225
113
Location
Portland, OR
I found a roll in the garage. NSN # 5970-00-177-1627. Insulation tape, electrical. There is a post on that expensive auction site, asking $20 a roll, but he has pictures up. I have a bunch if people have interest and can do a classified if anyone is interested. Prob 1/4 of that plus shipping. I may have 40-50 rolls of this stuff
I'm down to check it out. Sounds like interesting stuff. let me know how to get a couple rolls.
 

spankybear

Well-known member
884
911
93
Location
WA
I found a roll in the garage. NSN # 5970-00-177-1627. Insulation tape, electrical. There is a post on that expensive auction site, asking $20 a roll, but he has pictures up. I have a bunch if people have interest and can do a classified if anyone is interested. Prob 1/4 of that plus shipping. I may have 40-50 rolls of this stuff
I believe that is MIL-I-46852 self fusing tape. We have that at work and I do not like working with it... Link to the river https://www.amazon.com/MIL-I-46852-Mil-Spec-Silicone-Rubber-Electrical/dp/B099KWCSZZ
 

flyfishtrailer

Well-known member
Steel Soldiers Supporter
554
1,041
93
Location
Cool, CA
wow....I can see now how it has some uses in the automotive side, especially where wire passes through clamps or metal holes (like a firewall). I guess I will need to put some of this up for sale as I have more than a lifetimes supply.
 

87cr250r

Well-known member
1,267
1,988
113
Location
Rodeo, Ca
It's good stuff and has lots of uses. Silicone tapes are actually very poor against abrasion resistance but they resist oil and sunlight very well. There are other, tougher self fusing tapes such as Scotch 23 which are EPDM based but turn to goo with the slightest exposure to oil.

If I were taping up splices in enclosures I would pick the Scotch 23. A layer or Scotch 88 protects the 23 from oil exposure in generator enclosures. Scotch 2520 under the rubber tape prevents punctures from sharp edges.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks