Wiring an ATS to the MEP803a

[technoid]

I plan to install an ASCO ATS. Does anyone know what the wire taps are on the 803 control board to wire the start sequence? Or is there an option kit to convert to ATS control?

 

[kloppk]

Which 803 "Control Board" are you referring to?

I offer a Control Board that provides 2 wire Start/Stop capability to work with an ATS and other systems.

 

[technoid]

MEP 803a. I thought I had it in the post title.

 

[technoid]

Does your board offer the time circuit to operate the pre-heaters, primer, befor the start closure?

 

[kloppk]

Yes
All of the times for Pre-heat, Priming, Cranking, warm up and Cool down are all user settable. Different time delays can be set for WiFi start/stop and 2-wire start/stop.

The Pre-heat only occurs when the temperature is below 40F. The controller has a temperature sensor to determine if a Pre-heat is required.

In my signature area is a link to the listing in the classifieds. In the listing is a link with an extensive video that goes over a lot of it's features.

 

[technoid]

Thank you Sir. I sent you an email.