- 2,677
- 8,648
- 113
- Location
- Alexandria, La
When you are attaching springs of any type, it is MUCH safer to use vice-grips instead of channel locks or pliers.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Word to the wise.
- Thread starter kendelrio
- Start date
Offroadfabworks
Banned
- 1,331
- 5
- 0
- Location
- decatur alabama
Ouch.
but atleast you remembered your camera
..
but atleast you remembered your camera
..
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
hmm I did that a long time ago.. punched my self in the eye and got a black eye. that was the last time I did that.
OLDCHEV4X4
New member
- 690
- 2
- 0
- Location
- Glenmoore PA
I did that one time with a rear brake spring.
Glad it didn't get you in the eye.
Glad it didn't get you in the eye.
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
Ouch! Safety glasses are a good idea, too! I'm glad the injury wasn't worse.
Hmm, gonna use that for your new avatar picture?
Hmm, gonna use that for your new avatar picture?
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
The song "Duelling Banjos" from the film "Deliverance" came to mind when I saw your photo. 
Glad to see there wasn't a trip to the ER. You could be a spokesman for Vice-Grip Pliers!
Glad to see there wasn't a trip to the ER. You could be a spokesman for Vice-Grip Pliers!
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
Look's like another member of Felony Fights.
alphadeltaromeo
Active member
- 1,901
- 3
- 38
- Location
- Alto, GA
Man your wife has quite the punch!
- 3,657
- 27
- 48
- Location
- Dallas, Texas
amazing.. It always seems every "vehicle work" session must be done with a blood sacrifice. No matter what, no matter how small or large, the job just won't go until a token bit of blood is spilt. I'm glad you didn't get hurt bad. That looks painful. Is that a cut on the side of your nose? man be careful out there.
DanMartin
New member
- 1,276
- 16
- 0
- Location
- Hillsboro, Oregon (USA)
Fight Club.
dependable
Well-known member
- 1,720
- 188
- 63
- Location
- Tisbury, Massachusetts
Thanks for the safety tip
The theme song to the "Caterpillar safety movie Shake Hands With Danger" comes to mind..Actually everyone should check this one out, Has accurate depictions on several accidents that could happen to us, including explosive air brake cylender dissasembely, removal of final drive axels WO blocking, shop accedents ect. You can watch it on line for free. google What I have in quotation marks above.
The theme song to the "Caterpillar safety movie Shake Hands With Danger" comes to mind..Actually everyone should check this one out, Has accurate depictions on several accidents that could happen to us, including explosive air brake cylender dissasembely, removal of final drive axels WO blocking, shop accedents ect. You can watch it on line for free. google What I have in quotation marks above.
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
That was good, and now I have the song stuck in my head!dependable said:
I found it here:
http://www.archive.org/details/ShakeHan1970
Green_gator
New member
- 760
- 1
- 0
- Location
- Tampa, Fl
I keep hearing the theme song to "Cops" in my head after seeing that photo.
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
Now, be nice.Green_gator said:
Hey kendelrio, I like the "white clutter" comment in your signature. That's funny!
ucfjeeper
New member
- 172
- 0
- 0
- Location
- St. Cloud, Fl
hopefully you were wearing safety glasses as well...
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
I was wearing safety glasses. Was replacing a spring on my Harley actually, but felt it was a good safety topic. Avatar??? Hmmm..... NF6X, thanks....
kcimb
Well-known member
- 1,335
- 212
- 63
- Location
- Fort Worth, Texas
kendelrio said:
HOOOAH Bad boys what ya want what ya want what ya gonna do when they come for you...
I always loved hearing that song play. It meant another 1/2 hour of fun was about to start
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
Today I was disassembling the tailgate of one of my CUCVs, with the usual rear window regulator problems. I managed to get the window pushed down despite a stripped window regulator gear, opened up the tailgate and removed the inside cover. I found that the glass was no longer attached to the metal sash, and simply slid it out of the tailgate.
I was about to remove the regulator when I realized that the arms were down, the gear was stripped, and I recalled that powerful clock spring that counters the window's weight. So, I got my hands out of the way, sang a few bars of "shake hands with danger", and gave the window crank a little twist...
BANG!!
The arms shot up like a pair of guillotine blades. If they had done that while I was removing one of the mounting bolts (and they probably would have), then I could've been Three Finger Joe.
I'm glad this thread came along. It's good to reflect on safety every now and then!
I was about to remove the regulator when I realized that the arms were down, the gear was stripped, and I recalled that powerful clock spring that counters the window's weight. So, I got my hands out of the way, sang a few bars of "shake hands with danger", and gave the window crank a little twist...
BANG!!
The arms shot up like a pair of guillotine blades. If they had done that while I was removing one of the mounting bolts (and they probably would have), then I could've been Three Finger Joe.
I'm glad this thread came along. It's good to reflect on safety every now and then!