Wrecker count

[Csm Davis]

How do I add to the count

I now have another 816

 

[Csm Davis]

Okay all you guys that got 936's step up or I may have to call you out, I know there are more than 11 936's on here there are four here waiting to go home.

 

[Augdog1964]

M936 in Lansing

I just bought an M936 last week... she's sitting in Lansing MI.
Excited to get her home... EUC has been submitted, check goes out Monday.

I do want to switch her to an M936a1 or a2, so I'll be leaning on the site for info on rims and tires... thanks all!

 

[indy4x4fab]

O.k. so how added the m60?

 

[73m819]

M109808 did

 

[indy4x4fab]

Well M109808 can we see a few pictures of your wrecker please?

 

[73m819]

Well M109808 can we see a few pictures of your wrecker please?

These are from the thread "rare deuces"

 

[vtdeucedriver]

YEA..................M62 in THIRD!!!!!

 

[USAFSS-ColdWarrior]

<applause>​

 

[SCSG-G4]

I know where there are two 800 series wreckers, one is going to be scrapped. They are in the Columbia, SC area. Since neither is mine, I'll not add anything to the poll.

 

[Csm Davis]

Okay all you guys that got 936's step up or I may have to call you out, I know there are more than 11 936's on here there are four here waiting to go home.

Bump!

 

[swiss]

Ron added the M62 Gasser today! Thank you for bum[ing the post, I was thinking of updating the poll in the past few days! M62's ROCK!

 

[sandcobra164]

Ron, one M936 has left It found a home where it will be used more than occasionally and I'm holding out for a M931 or M932A2 type truck.

 

[73m819]

did the 936 go to a SSer

 

[sandcobra164]

Negative, to a local Wrecker company that felt the need for more winch power and more off road capability due to people getting trucks stuck going to the deer camps on slick GA Red Clay roads. They never called me and it would've been cheaper for them to do so but then again, I'm not Commercial and don't carry that kind of Insurance. Truck went to a good home.

 

[mdmorgan]

Here is ours. 1984 M936

 

[RAYZER]

Hi guys.
Recently i have taken ownership of a m246 wrecker/tractor,1963 with a mack motor,the previous owner ( highfavor ) made quite a few mechanical repairs and got most everything working,all it needs now are some exstensive cosmetics,tires,brake service and a few odds and ends,i should be starting on the refurbishment of this beast toward the end of this year!

 

[zebedee]

Congrats Rayzer... envy envy envy.....

I'll have to make do for now with an 816 and converter dolly (when I can find one).

 

[jets1959]

Hi guys.
Recently i have taken ownership of a m246 wrecker/tractor,1963 with a mack motor,the previous owner ( highfavor ) made quite a few mechanical repairs and got most everything working,all it needs now are some exstensive cosmetics,tires,brake service and a few odds and ends,i should be starting on the refurbishment of this beast toward the end of this year!

Very cool and versatile rig!!!!!

 

[indy4x4fab]

Hi guys.
Recently i have taken ownership of a m246 wrecker/tractor,1963 with a mack motor,the previous owner ( highfavor ) made quite a few mechanical repairs and got most everything working,all it needs now are some exstensive cosmetics,tires,brake service and a few odds and ends,i should be starting on the refurbishment of this beast toward the end of this year!

That's what I want or the m819, glad its staying in the ss family, and found suck a good home.