Wrecker Nut Question

[rumplecat]

Can someone tell me the size of the bolts holding the jerry can holder on the hydraulic pump and tank on the 5 ton wrecker(543/816)? I don't have one on my truck so I am going to fab up the bracket unless someone has one they are willing to part with. The TM has a diagram of the bracket but nothing I could tell on the bolt sizes.
Thanks,
James G.

 

[DaveP]

if they are the same as the rest of the can holders they should be 3/8" .

 

[rumplecat]

I am more interested in the two bolts that hold the base of the bracket to the filter housing. They look much larger than 3/8.
James G.

 

[redass73]

i will pull one out tomorrow and measer it for you.
rick

 

[rumplecat]

If you can just get me the head size I can get the depth.
Thanks,
James G.

 

[redass73]

easy enough. i'll do it inthe A.M

 

[Gamagoat1]

Jim,
They are all 9/16 heads except the bolts that attach the mount to the oil tank. They are 1/2 head with a 1/2 lock nut.