- 83
- 20
- 18
- Location
- Albuquerque, New Mexico
Need - correct (NOT A GENERATOR) M274 mule engine - if it turns over I am interested. Photos of what you have a must.
Call DaninNM anytime 505-269-2056
Call DaninNM anytime 505-269-2056
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
WTB: Correct Mule Engine-must turn over/run
- Thread starter DaninNM
- Start date
surfdog
Member
- 251
- 3
- 16
- Location
- Altamont NY
I don't know much about mules at all.
How are the "real" mule engines different from the gas 5 kw gen set engines?
How are the "real" mule engines different from the gas 5 kw gen set engines?
cjcottrill
Active member
- 338
- 33
- 28
- Location
- Chillicothe, Ohio
I can't vouch for it at all, this is listed on Craig's List in Columbus Ohio:
military 10 HP engine NEW 2A042 Mule
military 10 HP engine NEW 2A042 Mule
surfdog
Member
- 251
- 3
- 16
- Location
- Altamont NY
Looking at a loose engine how would you tell it's a generator engine instead of the correct mule engine?
Do they have different model numbers?
- 26,246
- 1,179
- 113
- Location
- NY
Totally different shrouding. Oil filters are different too. Several other things but those are the most obvious things.
It could be "converted" with the mule items(if you have a mule engine to remove them from.
It could be "converted" with the mule items(if you have a mule engine to remove them from.
- 1,156
- 4
- 0
- Location
- Santa Clarita, Ca
On a generator engine, the flywheel has the fan built into it, the mule engine has it's own belt driven fan with different shrouding. They might be the same basic block, but I'm not sure.
cjcottrill
Active member
- 338
- 33
- 28
- Location
- Chillicothe, Ohio
Like I said, I can't vouch for it, only went by the OP heading.
natem
Member
- 692
- 17
- 18
- Location
- freeland/michigan
Real mules have 4 cylinders.
Attachments
Sirblissfull
New member
- 470
- 7
- 0
- Location
- New Mexico
Welcome to the boards Danin.
There is a member of the local MVPA that is selling a Mule complete in New Mexico he might know of a local supply for parts. With no introduction I have no idea if your a local member and we have met or not so PM if you want the contact information.
There is a member of the local MVPA that is selling a Mule complete in New Mexico he might know of a local supply for parts. With no introduction I have no idea if your a local member and we have met or not so PM if you want the contact information.
charles fitton
New member
- 2
- 0
- 0
- Location
- maryhill ontario canada
"Welcome to the boards Danin".
There is a member of the local MVPA that is selling a Mule complete in New Mexico he might know of a local supply for parts.
( I think DAN is IN NM )
There is a member of the local MVPA that is selling a Mule complete in New Mexico he might know of a local supply for parts.
( I think DAN is IN NM )
natem
Member
- 692
- 17
- 18
- Location
- freeland/michigan
4 cyl. mule in action.
Sirblissfull
New member
- 470
- 7
- 0
- Location
- New Mexico
Welcome to the board Charles
You quoted me and did not notice my use of the word LOCAL 3 times and New Mexico as well?
I also pointed out he made no introduction. He might be the very guy that is selling the mule.
Context is very important!
You quoted me and did not notice my use of the word LOCAL 3 times and New Mexico as well?
I also pointed out he made no introduction. He might be the very guy that is selling the mule.
Context is very important!
- 410
- 34
- 28
- Location
- Atlanta, Ga
Real mules have 4 cylinders.
**** straight!!!! I've owned a few 4 cylinders and I'm currently restoring a 4-1958 original USMC 106mm M274. Will post photos as it comes along. If anyone needs 4 cylinder or other early mule parts, let me know.
Jason
natem
Member
- 692
- 17
- 18
- Location
- freeland/michigan
I knew I'd find a 4cyl fan out there sooner or later. 
Nate
Nate
- 890
- 158
- 43
- Location
- Las Vegas Nevada
4 cyl's are overrated 2 cyl FTW
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Bill Watson has anything you could possibly need for the 2 cylinder mule.![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")