Yellow screen fix for Ammps control module

[jmenende]

Alright fellas. I decided to take a few pics of the yellow screen replacement process for the ammps control panel. Dont know if im the first to post it but here it goes.

I also included ramdom pics of the boards and the cmos battery (1/2AA 3.6v)model that will need to be replaced eventually. Make sure you ground yourself before touching the board.

Material list:
T-15 torx
Alcohol pad
Razor
Gloves
Rtv silicone
Uv resistant plexiglass and scoring tool
Sandpaper

 

[FarmingSmallKubota]

So i was correct in a previous thread and telling you that the battery needed changed to keep your settings and memory alive when the breaker is shut off?

 

[jmenende]

So i was correct in a previous thread and telling you that the battery needed changed to keep your settings and memory alive when the breaker is shut off?

Probably but i figured these fancy shmamzi modules would atleast give me a battery low indicator.

 

[kloppk]

I had to do the same fix to a DCS a couple of years ago. The window was horribly discolored and bubbled making viewing of the screen quite difficult. Now it's crystal clear.