Reworked LMTV
Well-known member
- 1,475
- 1,151
- 113
- Location
- TN
I need to re-attach the load sensor air brake valve on my M1088. Anyone have a picture of this mounted that I can use as a reference? Thank you in advance!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anyone have picture of properly mounted air brake load sensor valve on an m1088?
- Thread starter Reworked LMTV
- Start date
Reworked LMTV
Well-known member
- 1,475
- 1,151
- 113
- Location
- TN
Just need a quick picture of how this brake load sensor is mounted. I took the 5th wheel off and am trying to recall where it was mounted. Thank you in advance!
Ronmar
Well-known member
- 3,342
- 6,745
- 113
- Location
- Port angeles wa
Well I don’t have any 1088 info available, but this video shows it on a 1079. When mounted, the end of the lever arm on the load sensing proportioner should be directly above the bracket that the cable attaches to…
Ronmar
Well-known member
- 3,342
- 6,745
- 113
- Location
- Port angeles wa
That would be correct…
Reworked LMTV
Well-known member
- 1,475
- 1,151
- 113
- Location
- TN
Still need a picture of this item mounted, if you can spare the time : )
- 267
- 912
- 93
- Location
- Knoxville, TN
@Reworked LMTV , I just saw this. I'm picking up some overtime today at work, but if you don’t have pictures by 7 tonight I’ll snag some pictures off my 1084 when I get back home.
Last edited:
Reworked LMTV
Well-known member
- 1,475
- 1,151
- 113
- Location
- TN
Thank you!
- 267
- 912
- 93
- Location
- Knoxville, TN
@Reworked LMTV , here’s the pictures. The first three are from the back facing forward and the last is from the front looking back.
Attachments
Reworked LMTV
Well-known member
- 1,475
- 1,151
- 113
- Location
- TN
Thank you very much Godspeed!!
coachgeo
Well-known member
- 5,019
- 3,369
- 113
- Location
- North of Cincy OH
did a search for 1088 images etc. came across this video at 1:39 there in the rectangle spot that is sunlit, between the chassis rails, right side, you see what I think is the cable going up. Hope this helps.
coachgeo
Well-known member
- 5,019
- 3,369
- 113
- Location
- North of Cincy OH
maybe hit up @ckouba he has a M1088 .
- 267
- 912
- 93
- Location
- Knoxville, TN
Anytime, and if those don’t help much and you need any more or ones at any other angle just let me know.
We already chatted off-line. I don't have the valve in question. It may be the difference between an A0 and A1, or mine was deleted by someone...