Blue2actual
Member
- 352
- 23
- 18
Can anyone verify that If your serial # starts with 1GCH that you have an M1028, as opposed to an M1008? Because if that's the case, then I have been wrong about my truck all along. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1028?
- Thread starter Blue2actual
- Start date
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
Read the FAQ section.
Blue2actual
Member
- 352
- 23
- 18
unless I am blind, I see nothing about VIN info, minus the J code 6.2
http://www.steelsoldiers.com/cucv/20600-faq-thread-cucvs.html#post217489Can anyone verify that If your serial # starts with 1GCH that you have an M1028, as opposed to an M1008? Because if that's the case, then I have been wrong about my truck all along.
You may also be interested in this thread.
Blue2actual
Member
- 352
- 23
- 18
winnnna winnnna chicken dinnnna
Last edited:
Blue2actual
Member
- 352
- 23
- 18
matt, CARNAC's info on my truck said it was an M1008 so that is what peaked my curiosity....
I'm pretty sure I have a 1028, and NOT a 1008
Last edited:
Based on the 4th digit:H that you mentioned, I would say it's the higher GVWR of the 1028.
4th digit = GVWR/Brake System
-- E = 6001 - 7000 Hydraulic
-- F = 7001 - 8000
-- G = 8001 - 9000
-- H = 9001 - 10000
Can you confirm any of the other M1028 Specific features like a front locker on your truck? Others can be found here.
Blue2actual
Member
- 352
- 23
- 18
I haven't pulled the diff cover up front yet, but the rebuilt 205 I have in there pretty much is the icing on the cake. I didn't think much of it until CARNAC came back with it as a 1008...?
86m1028
Active member
- 1,687
- 17
- 38
- Location
- Murphy TEXAS
Np205 would make it an m1028A1
Last edited:
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
Does your Vin on the dash match the Vin # on the data plate(located inside drivers door jam)? If so, what is the NSN listed on the data plate? And was any MWO done?Can anyone verify that If your serial # starts with 1GCH that you have an M1028, as opposed to an M1008? Because if that's the case, then I have been wrong about my truck all along.
NSN: 2320-01-123-6827 = M1008 (208 TRANSFER)
NSN: 2320-01-123-2671 = M1008A1 (208 TRANSFER)
NSN: 2320-01-123-2665 = M1009 (208 TRANSFER)
NSN: 2320-01-123-5077 = M1028 (208 TRANSFER)
NSN: 2320-01-158-0820 = M1028A1 (205 TRANSFER)
NSN: 2320-01-295-0822 = M1028A2 (DUALLY/205 TRANSFER)
NSN: 2320-01-325-1937 = M1028A3 (DUALLY/208 TRANSFER)
NSN: 2320-01-133-5368 = M1031 (205 TRANSFER)