Findlay2012 Swap list

[seekhim1]

here is one ....E-bay hyperlink removed

 

[gimpyrobb]

$2500? Good luck.

 

[kipman]

Get the creepy avatar off there, now you are a double Gimp.

 

[Speddmon]

Kip,

he's got a foot fetish I think

 

[swbradley1]

Yeah, but it's his own foot............

Yuck

 

[Speddmon]

Remember, this is the gimp we're talking about. Nobody ever said he was altogether there

And don't forget...he also insures his nuts Insured postage?

 

[doghead]

Why doesn't he have any toenails? That's weird...

 

[11Echo]

Wait until it stops hurting and starts to itch!

 

[camp9]

Anyone buy those telephone wire rolls at wright-pat today? I'd be interested in buying one roll if you are going to the Findlay show.

 

[kipman]

Not me.

 

[Speddmon]

I have a used, but looks to be pretty complete M1941 Tent heater and 6 flu sections laying around in my garage if anybody wants it, PM me for a price and I can get it to the show. I didn't take pics of the flu sections cause they are kinda rusty.

Also, I have about 40 feet of 8 awg 3 conductor type SO "Supertrex" rubber cord CHEAP. Again PM me for a price and if you want it make it quick. If you know anything about SO cords, "Supertrex" brand is TOUGH stuff. Will last through just about anything.

Since Findlay is coming up REAL soon, and I can't make it, if anybody wants this stuff let me know ASAP so I can get it to Kip to bring along to the show.

 

[319]

All,

I'm looking for the female mate (with or without cable) for this three conductor male connector:

 

[319]

I have a used, but looks to be pretty complete M1941 Tent heater and 6 flu sections laying around in my garage if anybody wants it, PM me for a price and I can get it to the show. I didn't take pics of the flu sections cause they are kinda rusty.

Also, I have about 40 feet of 8 awg 3 conductor type SO "Supertrex" rubber cord CHEAP. Again PM me for a price and if you want it make it quick. If you know anything about SO cords, "Supertrex" brand is TOUGH stuff. Will last through just about anything.

Since Findlay is coming up REAL soon, and I can't make it, if anybody wants this stuff let me know ASAP so I can get it to Kip to bring along to the show.

How much do you want for the 8/3 cable?

 

[gimpyrobb]

I might have your plug Eric.

Nope, the one I got is a 4 conductor.

 

[Speddmon]

How much do you want for the 8/3 cable?

I'm not 100% positive on the length, I can measure it to be sure. Buck a foot sound fair? That stuff sells in the neighborhood of 5 to 7/foot

 

[Speddmon]

Eric, That plug you need....inside the connector you have, there is a series of numbers (I can see only part of it in pic 2) that ends with -024F. Give me that complete string of numbers and I can tell you exactly what you need to get for a mate, and where to get it. Or a better photo of the blue part of the plug.

 

[kipman]

Plug geek

 

[Speddmon]

Not really, it's a standard Amphenol plug. Just need the part number and look in the catalog to find it's better half

 

[kipman]

The fact you knew that without searching is scary.

 

[319]

Not really, it's a standard Amphenol plug. Just need the part number and look in the catalog to find it's better half

It's a Crouse-Hinds. Blue plastic says RPE-033-024P 04 (TM says REP-333-006PO4N for the complete motor base). Checked on the net and just have to decipher the C-H catalog numbers to get the correct connector. I checked two local "distributors" today and the best comment was "Duh".
I'd like to find the entire Mil-spec cord and connector assembly (which is not listed in the TM) rather than piece it together. This is the auxiliary input for my SGPRSMD and I don't really have to have it. It's for 240V 3PH.

Tom, are you familiar with the Hobart Dynamotor-welders?