• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Fresh Line-X in the M1009

readyman

Member
523
7
18
Location
Elk Grove Village, Illinois
CycleJay,
It's a term I use when I jump inside with a spraygun and spray 'everything' with CARC paint.
I see it a lot with CUCV resellers who powerwash the engine compartment and then spray the whole engine/compartment with black CARC. :-|
I wasn't talking about explosives.

Hello Readyman,

The line X job looks great, I would liked to get my interior professionally lined too, when I can afford it, so it can get done right, and it will be tougher,
than doing it myself. But I will consider doing it myself anyway, we shall see..

But what do you mean by a 383 CARC bomb?
 

True Knight

Active member
673
179
43
Location
San Pedro, CA
For the purists who want that 383CARC 'look' in their M1009 interior. The Line-X guy did a great job of color matching with their upgraded KEVLAR formula. I did all the prep work myself and drove 20 miles to the Line-X dealer with only a seat and a speedo. :cool: Because dealer disassembly was $.
Looking forward to revising the inside door stencil - Hose down interior only. :smile:
I welded up/Line-X'd a mount for the 40mm ammo can center console, that's the thing sitting on the hump.
I found out both Upol and Sem Bedliner has a tintable 'Do It Yourself' package for a fraction of the cost, only after I had Line-X do it. :x
Next thing to do is set off a 383CARC bomb in the interior without messin' up the Line-X job.
Very nice. I've been wanting to do the same thing in the cab and bed of my M1028.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks