- 8,280
- 655
- 113
- Location
- Corpus Christi, TX
http://www.steelsoldiers.com/showth...-4-14-21-13-near-Lodi-CA&highlight=tower+park
Link to the event information thread above.
What are you bringing or wanting?
My intent is to have a testing rig with 24v power to test commo equipment and lights and anything else needed.
Here is what I intend to have
1. Dome Lights for AFVs. These are the standard white ones with the blue and clear lenses.
2. Dimmer switch for the dome lights. (I had never seen these before).
3. AM1780 control box
4. C-2298 crew stations
5. MT1029
6. Mount for the R442 (can't remember the number).
7. Other VIC1 stuff including some cables and other types of boxes in small quantity such as the radio switch box used with the RT246 and 2 x C2296 and 2 x C2297 boxes
8. Crew and driver seats 5 pt restraint that will fit in deuce/cucv and other vehicles.
9. Will probably have a fair number of 395/85/R20 on te 10 bolt pattern rim
10, Might have a RT524
11. USGI brake pressure bleeder
12. Other various tools that I have multiples of that are USGI
13. RT 524 radio I have 2 and will probably package them as complete sets with a VIC-1 system and all cables. speaker, handset, etc.
14. Will probably rig up a board to test vic-1 and radio components. Nothing fancy, just plywood and pre-strung cables.
Looking for:
1. SCR510 WWII radio to include power supply with a jeep mount.
2. SCR528 WWII radio complete for a M2 halftrack.
3. RT246 radio
4. USGI specific tools listed in the following thread
http://www.steelsoldiers.com/showth...nd-quot-looking-for-quot-List&highlight=tools
5. Willys jeep, 1944 dated running/functional engine
6.
Will edit the list as time approaches.
Link to the event information thread above.
What are you bringing or wanting?
My intent is to have a testing rig with 24v power to test commo equipment and lights and anything else needed.
Here is what I intend to have
1. Dome Lights for AFVs. These are the standard white ones with the blue and clear lenses.
2. Dimmer switch for the dome lights. (I had never seen these before).
3. AM1780 control box
4. C-2298 crew stations
5. MT1029
6. Mount for the R442 (can't remember the number).
7. Other VIC1 stuff including some cables and other types of boxes in small quantity such as the radio switch box used with the RT246 and 2 x C2296 and 2 x C2297 boxes
8. Crew and driver seats 5 pt restraint that will fit in deuce/cucv and other vehicles.
9. Will probably have a fair number of 395/85/R20 on te 10 bolt pattern rim
10, Might have a RT524
11. USGI brake pressure bleeder
12. Other various tools that I have multiples of that are USGI
13. RT 524 radio I have 2 and will probably package them as complete sets with a VIC-1 system and all cables. speaker, handset, etc.
14. Will probably rig up a board to test vic-1 and radio components. Nothing fancy, just plywood and pre-strung cables.
Looking for:
1. SCR510 WWII radio to include power supply with a jeep mount.
2. SCR528 WWII radio complete for a M2 halftrack.
3. RT246 radio
4. USGI specific tools listed in the following thread
http://www.steelsoldiers.com/showth...nd-quot-looking-for-quot-List&highlight=tools
5. Willys jeep, 1944 dated running/functional engine
6.
Will edit the list as time approaches.
Last edited:
ahahaha
