Findlay 2013 Armed Forced Day Buy/Sell/Trade Thread

[Cleveland Iron]

If memory serves me... Slingshot distance. Seriously, historically the MV park is right next to the sales area.

 

[kipman]

It is next to the Steel Soldiers sales area, and that is all that needs said.

 

[319]

It is next to the Steel Soldiers sales area, and that is all that needs said.

What Kip means, is that if you have to step over drunken, passed out bodies, you're there!

 

[85CUCVtom]

Anybody have a stock Jack set-up for a M1009? I also really really really need a starter bracket for both a direct drive starter and a gear reduction starter. PM me .

 

[docfarmall]

And i just got 20 pounds of peanuts danggitt . This is gonna really be a bummer we aint even got any purrrrrrty ladies coming and Kippy dont say "" but Doc im wearn shorts""

 

[docfarmall]

Loadn tomorrow any one need five ton winches got some to load

 

[docfarmall]

Duece boarding ladders
flat black paint 5 gallon buckets full
plastic water jugs
m1009 jack
just ask or if its tomorrow call me i will be loading
call its better anytime

 

[hunderliggur]

Anybody have a stock Jack set-up for a M1009? I also really really really need a starter bracket for both a direct drive starter and a gear reduction starter. PM me .

Post#67 - docfarmall has one - contact him

 

[Junkyard Wars Crusher]

I have decided to drag the stencil machine to the show. I will produce custom stencils (with 1” tall letters) on-site at your request.



I use stencil board stock that is 6 ½” x 20”. This will allow up to four lines of text with 22 characters per line. Characters that are available are: Letters A-Z, numbers 0-9, period (.), comma(,) apostrophe(‘), slash (/), dash (-), and ampersand (&). See example below.



I can do the standard stuff such as "TP 50" or "CHECK BATTERIES DAILY", but can also do specialized stencils such as your screenname "SGT. ROCK", or your truck number "D-22". The truck number example is great for identifying your pioneer tool handles, chock blocks, tool boxes, ammo cans, etc. (The TM specifies 1” tall lettering for most of the instructional information on vehicles and equipment – so this is the correct size for restorations)



Here is a blank form to plan your stencil. Print a copy (or two) at home right now. Then go look at your truck(s) and figure out what stencils you need. Fill out the form and bring it to the show.
Click here for a simple .jpg picture version ->


Click here for the MicroSoft Word version -> Stencil Matrix Form 22x4.doc

These stencils are cut on industrial oilboard. They are easy to use and reusable. The oil board can be cut with scissors or utility knife. You can hold the stencil to the desired surface, tape them, temporarily affix with spray glue, or use magnets to secure them. Then lightly apply your chosen color of spray paint.


The pricing is very simple and very reasonable:
I will do one line of text for $4(includes the oilboard) .
For the super size deal, fill up the 4 lines for just $10 !

You do not need to pm me or reply to this thread. Just click the [thank] tab at the bottom of this post and then find me at the show. I will be in the covered area with many of the other steel soldiers guys. That super cool guy named kipman is going to sublet a small corner of his trading spot for me.

(Lastly, I shouldn’t have to say this, but . . . I will not do any words or phrases that would generally be considered offensive, or would portray our hobby in a negative light. I know the majority of us are respectful, but there always is a chance for one bad apple. Please keep it proper.)

 

[MWMULES]

Great Jeff I will need a few made, also found a yellow dingus for you if still looking.

Was loading this morning and found a 1945 and 1951 jerry cans that hold fuel and will be bringing, also a couple of NOS sand Temper vestibules, 16x16 Red Cross fly with poles. Couple crates of pup tent poles and some military tent stakes and some litters.

 

[Junkyard Wars Crusher]

Great Jeff I will need a few made, also found a yellow dingus for you if still looking.

Dave, If you are talking about the bridge plate part, the answer is yes. If the "yellow dingus" is something else, well then, you're gonna' have to explain it better.

Are you bringing any first aid stuff? I know we talked about it at GA rally. I can't think of anything specific, just browsing.

 

[Junkyard Wars Crusher]

I have a few additional items for sale. I will not bring these unless requested. If you want them speak up.

Deuce Air cleaner Housing $5




Really nice hood with a really big Dent. The previous owner mounted this hood to the truck, but not latched to grille. A strong wind lifted it and smacked it into the windshield frame (probably repeatedly). Also has Two tiny little cracks at front lip. Otherwise this hood is perfect. Might be good for a custom project if you are going to cut it up. Hinges/ latch / holddowns/ hardware not included. $15

 

[docfarmall]

Loaded
20 water jugs
7 ... 5 gal. cans flat black pait
5 gallons dot 5
orange tent pegs
red steel ones too
tilt bins
5 an 10 kw fuel tanks
5 an 10 kw starters
mixc. parts for 5 an 10 kw's
Duece starter
jerry can mounts
anyone interested in this ole girlView attachment 428642

 

[MWMULES]

Yep Jeff that is the yellow dingus that you want. Also found I had too many plastic fuel cans so will toss some in and some guidon/flag poles with the chrome spade top.

 

[docfarmall]

Is Elvis coming

 

[docfarmall]

S W your trailer is officially back up for sale !!!

 

[Junkyard Wars Crusher]

I have a few custom shirts for sale. These are brand new. Made in USA. Adult sizes $18. Youth sizes $15



Wrecker design and M35 Cargo design. Various sizes of each.
Graphics are Black and Green. Grey Only shirt color. Short sleeve only.

 

[kipman]

I give you a hug for one.

 

[swbradley1]

Does anyone need a LDT engine can with the adapter plate? $250

 

[kipman]

Made it home by 1630, good show, good seeing everyone.