Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mine definitely didn't fit. I just throw a spare in the bed and call it good.I got one to fit on stock location. The tread goes inbetween the seem for the storage box.
The problem with speed in the A3 is the CAT 3116 engine. Continuous operations with the stock 14.5 R20 tires limits the top speed to about 45 mph, whereas the A2 will do 55 with the 900 X 20 NDTs. The Allison 1545 transmission was designed to use Dexron III transmission fluid. The military used motor oil simply to eliminate the need to support another fluid in the field. However, Dexron III was a trademark of GM, and this fluid can no longer be sold as Dexron III. You need to use Dexron III compatible fluid. I used NAPA Dexron III, which is made by Valvoline, is identical to Valvoline, but much less expensive. I bought a five-gallon pail. Make certain that you don't use any Dexron ATF that has a higher number than III as those fluids are not compatible with the seals in the transmission. After changing out my fluid to Dexron III, my A3 shifts up and down much smoother. Dexron III and motor oil are not compatible, so if you change it out, make sure you get all of the motor oil out and change the filters. I changed mine out by using the drain and fill method repeatedly, driving a few miles between changes. Simply draining the pan is not sufficient.Thanks for the welcome, I replaced the headlight before I drove it home from Indiana to PA. 700 miles and 2 days later I made it home. That was one very long slow ride home. Someone told me an A3 will do 55mph, I don't where they got from. 50 was as fast as I could go. Do you know if changing the trans fluid to ATF is bad for the trans or makes it shift better and go faster or is that a myth too?
Well you can take this for whats its worth but when I switched out my trans fluid. I added synthetic. I dont think this was a good idea because the trans would run hotter. I am thinking this is because it was a thinner fluid. So I drained that out and added dex 3 and some thick Lucas trans oil additive and now I can bury the speedometer. I am guessing this is possible because the Lucas is so thick it wont allow as much converter slipping. Now speedo goes to 61. I think this is pretty accurate as I have 395'sYea I slapped some JB fix it all weld on it and put it in. The old one I would like to have rebuilt and maybe put that support in just to keep from having future problems.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!