ichudov
Member
- 399
- 15
- 18
- Location
- Chicagoland, IL
I read the DOT regulations on what lights are required for commercial vehicles.
It seems that both my M927 and M931A2 will need a top-cab-mounted three-piece amber identification light.
Additionally, my M927 is over 30 feet long, and will require amber side lights.
I have two questions.
1. Are there nice electrical "tees" that plug into the existing wire harness without doing ugly splicing, that I could use to wire additional lights.
2. What would you recommend, either 24v light bars, or 12v light bars for which replacement 24v light bulbs can be found.
Thanks
It seems that both my M927 and M931A2 will need a top-cab-mounted three-piece amber identification light.
Additionally, my M927 is over 30 feet long, and will require amber side lights.
I have two questions.
1. Are there nice electrical "tees" that plug into the existing wire harness without doing ugly splicing, that I could use to wire additional lights.
2. What would you recommend, either 24v light bars, or 12v light bars for which replacement 24v light bulbs can be found.
Thanks