• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Can you ID this bumper?

davesgmc

Active member
833
131
43
Location
Mclouth, KS
The ends appear to be bent in WAY more than one on any MTVR I have seen. The NSN is definitely oshkosh mfg. just not sold on it being an mtvr bumper by the way the ends are bent in so much, the mtvr bumpers seem to not have so much angle on them.

I am going to fill in the spaces where the frame tow loops stuck out and the square hole and make brackets and mount it upside down is the plan.
 

Chief_919

Well-known member
2,050
100
63
Location
Western NC
The ends appear to be bent in WAY more than one on any MTVR I have seen. The NSN is definitely oshkosh mfg. just not sold on it being an mtvr bumper by the way the ends are bent in so much, the mtvr bumpers seem to not have so much angle on them.

I am going to fill in the spaces where the frame tow loops stuck out and the square hole and make brackets and mount it upside down is the plan.
It is for the wrecker, the ends are bent more to fit the winch.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks