Help with Cab restoration M813

[zxmedic]

Help with Cab restoration M813 pics added

So now that I am Knee deep Into working on my 813 I have tried many searches for where what goes I looked behind the dash there are Certain key pieces missing I have no connection to the Volt meter Only gauges working are air pressure and Oil as well as tach and speedo engine kill not connected etc will try and post pics a little later . i was hoping Some one might have pics of the lay out behind the dash .. thanks in advance

 

[zxmedic]

I will take more that better show disconnected gauges the coloured wires are the Jake brake

 

[5tonman1971]

What pictures do you need of the dash?

 

[5tonman1971]

They have the m809 series TMs on the site they are a much needed item and help alot

 

[Warthog]

When I am working on a truck and want to "see" what is missing or needs to be replace, I open up the TM parts manuals and look at all the pieces.

The M809 series manuals are

LO 9-2320-260-12 Lube Order
TM 9-2320-260-xx series

 

[zxmedic]

Thanks guys I have hard copies of the TM. came with the truck as for pictures on the front side or back side of the firewall there are some fittings missing hence why I was hoping for some pics .

 

[5tonman1971]

Thanks guys I have hard copies of the TM. came with the truck as for pictures on the front side or back side of the firewall there are some fittings missing hence why I was hoping for some pics .

i will take pictures for you tomorrow

 

[zxmedic]

i will take pictures for you tomorrow

thank you So much

 

[zxmedic]

Where does this plug into

 

[nk14zp]

That's the low air sending unit.

 

[zxmedic]

My parts I ordered have started showing up . Sad to Say the packaging was lacking and some parts where crushed < and Bizarre that the bendixs stop switch new was assembled with the Wrong nuts to Hold the connectors in it ... Non the less I am not knocking the Company just long waits for me to Get parts in Canada and will have to wait some more.

 

[zxmedic]

Worked on instrument cluster today .
Will mount the Jake brake switches in the open gauge spot on a piece of checker plate .

 

[MyothersanM1]

Where does this plug into

BTW...That is the oil pressure lockout switch. The low air warning switch is in the background to the left in the pic.

 

[zxmedic]

Someone went to town on unpluging and cutting a couple wires. Groan

 

[MyothersanM1]

The lead from the oil pressure lockout switch goes to/comes from the PCB.

 

[zxmedic]

Well I know not original but found this to replace the stock drivers seat.

 

[zxmedic]

I gave up on thinking about fixing this harness. Will install the new one .

 

[zxmedic]

Does anyone know which wires go where on the cold circuit

 

[zxmedic]

 

[MWMULES]

Ok with the way yours is pictured on the left two 570 wires the rear left post one wire576 on the right 571,575jumper to the post behind it where loom 575 connects.