-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Newb in AZ
- Thread starter redneck20
- Start date
TacticalDoc
Member
- 602
- 26
- 18
- Location
- Otisville MI
Fun hobby but can get expensive. I'll be near Phoenix in July with my truck hopefully.
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
I think he has a used green one also for sale.
WRMorrison
Member
- 310
- 14
- 18
- Location
- Ramsey, IL
Looks good! What are your plans with it?
-WRM
-WRM
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
is the horn supposed to sound like it belongs on a honda? i was expecting a " big rig" sound when i pushed it.....kinda disappointed
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
LOL!!!! No it should a little deeper then that. Do you still have both your horns on it?
There is a set screw on the back of it to change to tune. I think.
There is a set screw on the back of it to change to tune. I think.
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
both? there is a single mount with a dual horn( long and short)
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
Sounds like it is all there, you may look for the set screw on the back side.
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
i have searched and searched....do HEMTT wheels bolt right on to a 923? I'm looking to put super singles on the truck soon and need wheels
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
if anyone close to me has drivin or currently does drive a cummins 250 would you mind driving my truck? would like to see if its "normal"
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
I do not think they will work. But I do not know for sure. I think they are the wheels with the 20 bolts to hold the wheel together and the regular 5 ton wheels have ten.
Last edited:
WRMorrison
Member
- 310
- 14
- 18
- Location
- Ramsey, IL
I'm sure you could find something at Alpha Tread in Tucson (where I got my wheels/tires).
-WRM
-WRM
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
Already sent him a PM
- 1,964
- 215
- 63
- Location
- Arizona
Not my pic, but useful info.
Attachments
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
Thanks!
redneck20
New member
- 71
- 1
- 0
- Location
- phoenix, az
Well I've slowly been working on this thing ... A few weeks ago we pulled the bed off to get easy access to replace the air lines..sense of security.
Yesterday we put the bed back on and I finished my repaint. I used gallons of rustoleum and thinned it. It sprayed beautiful. But I was limited on color choices, so the green is a bit "off" but for a full paint job for less than $160. I can live with it.... And it looks way better than the tan.
Also picked up a 50" led light bar, gonna get tht mounted next weekend.
Yesterday we put the bed back on and I finished my repaint. I used gallons of rustoleum and thinned it. It sprayed beautiful. But I was limited on color choices, so the green is a bit "off" but for a full paint job for less than $160. I can live with it.... And it looks way better than the tan.
Also picked up a 50" led light bar, gonna get tht mounted next weekend.
AZDeuce
Active member
- 484
- 38
- 28
- Location
- Tonopah, AZ
From the pictures it looks almost like Marine Corps Green........this Marine likes it. SEA BEES used the same color. Of course this was back in the early/mid 70s, but it looks pretty good on your truck too. All the Marine markings would be in yellow, and the Sea Bees trucks I've seen had black lettering with a yellow Sea Bee emblem on the doors.