• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LMTV recovery and failure, home now

Wile E. Coyote

Active member
394
78
28
Location
Lynden WA
Ah...so someone tried the "with front driveshaft removed" experiment! I wondered what would happen. You probably have to select Off-Road Mode to be able to drive it with the front driveshaft removed, as the same problem happens when you have to drive an NP218 equipped HMMWV with the front driveshaft out (at least the one I had to do it on here) and when you drive the Dodge M880 under the same conditions (again - my own singular personal experience with them anyway.) If you have time and want to try that - please post the results.
 

63foxtrot

Member
Steel Soldiers Supporter
159
3
18
Location
los angeles, ca
I do have a few complete front axles hub to hub, if anybody needs any in the future, along with many other parts. I bought all the BAE's left over FMTV parts.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
I live in Gainesville, a touch over a hour from atc, a LOT closer then 100 miles.

What was the end cost of getting it to your lz ??
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
The question is, would I sit under truck for 30 minutes in the rain at the nearest parking lot outside the truck storage location and do a thorough inspection or roll the dice, ($600)?

$30 worth of oil and some wet clothes...

No criticism here, just happy to learn for your experience(strengthens my commitment to be thorough).
 

patracy

Administrator
Staff member
Administrator
14,639
4,817
113
Location
Buchanan, GA
I know I know . Have you ever been to ATL truck center ? Moreland Avenue. Not a nice place to stop your vehicle.
I used to work in Decatur. I got on and off I-20 on Moreland or Maynard all the time. I had some thugs try to carjack me once. Then I had a group approach me at the gas pump thinking I was an easy mark. Thankfully I managed out of both situations unharmed.

I'm glad I don't have to frequent those areas anymore.
 

auctionaddict

Member
410
15
18
Location
blue ridge, ga
I used to work in Decatur. I got on and off I-20 on Moreland or Maynard all the time. I had some thugs try to carjack me once. Then I had a group approach me at the gas pump thinking I was an easy mark. Thankfully I managed out of both situations unharmed.

I'm glad I don't have to frequent those areas anymore.
Hey, I was just looking at your m1078 tm postings. Ive been looking for an hour, Is there an easy way to find only the LO for my truck ?
I want to change all the fluids and all I can find are military lubricant #s

Thanks !!
 

auctionaddict

Member
410
15
18
Location
blue ridge, ga
Finally got her home today !!!
It has been at a friends shop waiting on bearings, Got out lucky. Replaced 2 bearings/races and 2 seals. (200.00 total)
I think the diff was bad when I picked it up, It seems to run out ALOT better now, Much more power.
Now for the SW CARC camo paint and new soft top !!


lmtv1.jpg
 

whiskey357

Banned
168
0
0
Location
chicago,ill
Cool I guess the misses ...is letting you live for a while longer....have big plans this summer like a new garden....or a Mothers day outing??????///anyway you made it back in one piece...god o that...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks