Finally !! scored a hmmwv m998, LOTS to learn !! let the fun begin !!

[EwaMarine]

Auction addict...We have three. two are hardtop guntrucks, and one is a cargo variant. The tan one was woodland three tone, then tan, then some weird grey scheme for Jurrasic world and then back to tan...lol.. Heres some pics of the HMMWVs here:

 

[auctionaddict]

Very observant !! Already swapped the wheels and tires with some new m1102 trailers I had in the yard !!

Good looking truck. Just a note, you have radial tires on bias rims. Not a good combo to drive safely on.

 

[auctionaddict]

I cant, I start shaking if I dont bid !!

When your wife gets tired of the 1078 in the yard, I'll be first in line to take it off your hands...................

Nice Hmmwv you got there, you really don't stop do you?

 

[auctionaddict]

I am going camo, But all original looking with the original numbers and markings put back on her just like it is now !!

Stoked for you! Do the USMC proud and keep her legit looking!!!!

 

[EwaMarine]

Auction addict...We have three. two are hardtop guntrucks, and one is a cargo variant. The tan one was woodland three tone, then tan, then some weird grey scheme for Jurrasic world and then back to tan...lol.. Heres some pics of the HMMWVs here: View attachment 509743View attachment 509744View attachment 509746View attachment 509743View attachment 509745

 

[auctionaddict]

I think i'm gonna cry !!

New KDS smart start with controller, Ground harness, new glow plugs and new batteries.. It still wont start !!

I guess IP pump maybe ?

I have fuel squirting out of filter housing exit when I turn it over, but no fuel if I loosen the hard line at the head and spin it over..

 

[TedG]

Make sure you have 24vdc to the IP top cover. Sometimes the connection is not seated correctly or you have a bad solenoid. It should "click" when you turn on the ignition. If ran dry, it will take a while to purge.

 

[auctionaddict]

I do have power but didn't hear a click. I will check that, Thanks !!

Make sure you have 24vdc to the IP top cover. Sometimes the connection is not seated correctly or you have a bad solenoid. It should "click" when you turn on the ignition. If ran dry, it will take a while to purge.

 

[TedG]

Place you hand on the cover and then hit it with 24vdc by plugging it in. If you remove the cover, you should have fuel in the bowl. Make sure the check valve is not clogged or stuck closed. It is on the outside of the ip cover. Are you getting fuel on the outlet of the filter that feeds the engine?

 

[Jimmysparks]

Do you still have any of the abs units davo I have pmed you but I am new to this site I don't know if it worked ?

 

[Doug Roberts]

I want one too !!

 

[auctionaddict]

ABS? Davo ??

Do you still have any of the abs units davo I have pmed you but I am new to this site I don't know if it worked ?

 

[FloridaAKM]

They are sitting out there, but we are not allowed that level of fun says Uncle Sugar~!

I want one too !!

 

[Jeepsinker]

Crack a couple of the injector lines at the injectors and spin it over. I usually do three lines. It will fire off and then you can tighten up the lines while it is running.

 

[auctionaddict]

Put on my new solenoid and still nothing, cracked 3 lines and sprayed fuel in the intake. It tries to run but no go..
Maybe send the pump off for rebuild ??

 

[SETOYOTA]

Are you getting smoke out the tail pipe while cranking?

 

[auctionaddict]

Not unless I spray fuel in the intake


QUOTE=SETOYOTA;1592452]Are you getting smoke out the tail pipe while cranking?[/QUOTE]

 

[Jeepsinker]

Do you have the old 6.2, manual pump 6.5, or the electronic throttle controlled 6.5?

 

[auctionaddict]

Old 6.2

Do you have the old 6.2, manual pump 6.5, or the electronic throttle controlled 6.5?

 

[SETOYOTA]

Have you changed the fuel filter?