-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Behr Paint Jobs- Show me your MV's
- Thread starter wsucougarx
- Start date
Merc1973
Active member
- 308
- 38
- 28
- Location
- Sykesville, MD
Love this thread.
I would like to return the deuce to its original darker color. Has anyone used this paint in Vietnam era Olive Semi-gloss?
I would like to return the deuce to its original darker color. Has anyone used this paint in Vietnam era Olive Semi-gloss?
You are looking for color FS 24087
There have been many threads on this. Here is one.
http://www.steelsoldiers.com/showthread.php?81502-Show-your-24087-deuces!!!
There have been many threads on this. Here is one.
http://www.steelsoldiers.com/showthread.php?81502-Show-your-24087-deuces!!!
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Yep
if you over spray rough CARC you will need to sand smooth the weird parts of the finish on ammo trailer is where I didn't 
behind fuse box and upper rear corner.Attachments
Merc1973
Active member
- 308
- 38
- 28
- Location
- Sykesville, MD
Wow, perfect. Thank you very much!!!!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
SW Bradley was telling me they loaded Behr in spray cans for him ? This is a step up for a lot of us for touch up or even full jobs with folks without spray equip - maybe Swbradley can chime in here and tell us how they did it and how long it took.
I have small airless with a qt on it. While I imagine rattle cans are easier, the airless is pretty easy in its self, and with the small nozzle is pretty accurate.
Another Ahab
Well-known member
- 18,003
- 4,565
- 113
- Location
- Alexandria, VA
Nice work: what set-up did you use? HVLP?
wsucougarx
Well-known member
- 6,951
- 67
- 48
- Location
- Washington State
I forgot to share my M109A3 project I did a few weeks back. It started out as touching up the roof's sealant to repainting the whole truck just for the heck of it
Attachments
This is the gun I used it cost me $120.cdn , as for settings I did not cut the paint I turned the air up I ran 100psi and a inline water separator .
Attachments
Merc1973
Active member
- 308
- 38
- 28
- Location
- Sykesville, MD
Thanks. Most of my truck is ROUGH CARC. So with a semigloss 24087 it would need to be sanded?
Maybe i will pass on the 24087...
22b
New member
- 31
- 0
- 0
- Location
- Calgary/Alberta
M113A2, TUA, M113 Dozer, coming up three years.
Last edited:
Another Ahab
Well-known member
- 18,003
- 4,565
- 113
- Location
- Alexandria, VA
Oh, Man; that is a nice collection of total armor, 22b:
- It's a TRIFECTA- Win/ Place/ Show
Sweet.
Last edited:
plode
Member
- 270
- 3
- 18
- Location
- South Jersey
Well I've got the truck almost completely painted. Still have a couple spots to touch up, and under the truck to do. Haven't figured out how I'm going to tackle with getting under the bed yet. Needs to get wire wheeled(rust) and primed with some rusty metal primer first.
I'm not sure if I like the solid green or not. I think it looked so much more "mean" with camo, so I might have to add the black and brown soon. Also have to replace the mud flaps.
This was all painted with Behr Marquee. Used a foam roller and a paint brush for 90% of it. I messed with a Wagner sprayer for a tiny bit of it(back side of cab, front of the bed, and the sides of the bed). The sprayer mainly made a mess, and it was just easier for me to roll it.
I'm not sure if I like the solid green or not. I think it looked so much more "mean" with camo, so I might have to add the black and brown soon. Also have to replace the mud flaps.
This was all painted with Behr Marquee. Used a foam roller and a paint brush for 90% of it. I messed with a Wagner sprayer for a tiny bit of it(back side of cab, front of the bed, and the sides of the bed). The sprayer mainly made a mess, and it was just easier for me to roll it.
Another Ahab
Well-known member
- 18,003
- 4,565
- 113
- Location
- Alexandria, VA
Save yourself the trouble; that green looks good.
The big rig, all by itself, is already "mean".
Last edited:
hoplite666
Member
- 153
- 1
- 18
- Location
- Fairfax VA
Just started my Behr job. I know it's not everyone's cup of tea but I chose to step away from the factory greens and decided on "olive leaf." It's a bit darker than 383 and was right there on Home Depot's sample wall. I'm just finishing up the top and am very pleased. Sprayed the paint un-thinned with a Wagner Flexio 570. BTW this sprayer works very well. No runs, very quiet, very adjustable.
Last edited:
Scottd9990
New member
- 157
- 0
- 0
- Location
- Concord, NC United States
Just sprayed mine the past few days as well. Much better now. Still have lots of little places tovfinish up.
Attachments
Scottd9990
New member
- 157
- 0
- 0
- Location
- Concord, NC United States
Few more
Attachments
Smithy
New member
- 1
- 0
- 1
- Location
- Syracuse NY
Here is my Behr paint job. It's not an MV, but a former EMS vehicle, for whatever that's worth. A complete color change, the truck used to be white, took almost 2 gallons. I used a Harbor Freight airless sprayer on the door jams and hard to reach areas, then a roller on the outside. Two coats on everything.
I couldnt be happier with it. The paint has the correct feel and texture I wanted. After a few trips through the woods, rubbing on trees and riverbanks, the paint is well "pinstriped" but there is no chipping or peeling. Even around the new dents.
I couldnt be happier with it. The paint has the correct feel and texture I wanted. After a few trips through the woods, rubbing on trees and riverbanks, the paint is well "pinstriped" but there is no chipping or peeling. Even around the new dents.
