nchittendon
Active member
- 544
- 28
- 28
- Location
- La Crosse, Wisconsin
If you were at Iola you saw the half track! Still love that build.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What do you build?
- Thread starter BenTerrible
- Start date
Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
Thanks.
Looks like your wheelhouse is on the other end of the spectrum-big stuff with high strength design and weld. American ingenuity is alive and well.
Thanks for posting.
Pete
- 6,066
- 4,429
- 113
I built a cart for my welder this morning.
- 6,066
- 4,429
- 113
A device for disassembly of pallets without damage to the wood so the wood can be repurposed.
- 6,066
- 4,429
- 113
More tables....
(Good welding skills come from experience, much of which comes from poor welding skills
)
Last edited:
dawico
Member
- 728
- 1
- 18
- Location
- Lampasas,TX
You guys do some amazing work. I can weld but nothing worth putting up here. I mainly tinker with welding. Anything structural gets done by my buddy.
The stuff I build looks like this:
The stuff I build looks like this:
Attachments
Nice work, I'm in the same field but this machine doesn't have any of my finished work on it.
elkhtr
Member
- 502
- 12
- 18
- Location
- Stanwood, Wa.
Does machine work count?
Structural test fixture for Fender Stratocaster type guitars.
Built in my garage.
Structural test fixture for Fender Stratocaster type guitars.
Built in my garage.
Attachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Post photos of what you have fabricated! (heres a pink pig --->)
View attachment 436200View attachment 436199View attachment 436194
You get bragging rights, and a good thread to serve up; thanks:
- Can you throw in a little bit of backstory though on the pieces you posted up?
Be interesting to know what some of them are all about.
- 6,066
- 4,429
- 113
A bumper in the making... 3/8" plate + 4×4" square tubing 1/4" wall thickness.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Pretty welds. Nice.
Last edited:
cannonfoddertfc
Member
- 33
- 1
- 8
- Location
- JBLM, WA
I agree, nice pretty welds. I learned long ago that if you weren't good at welding you had better be good at grinding.... I am good at grinding LOL
MarcusOReallyus
Well-known member
- 4,524
- 816
- 113
- Location
- Virginia
- 6,066
- 4,429
- 113
$70 for this one at the tractor supply - 
Or $10 in materials for this one I made today -
Or $10 in materials for this one I made today -
- 388
- 762
- 93
- Location
- Mansfield, PA
This video isn't the best but this is how we make the M151 front floors:
https://www.youtube.com/watch?v=-C1amAOnBy4
https://www.youtube.com/watch?v=-C1amAOnBy4
elkhtr
Member
- 502
- 12
- 18
- Location
- Stanwood, Wa.
Ok, how about custom made whiskey stills.
My buddy decided that a legitimate distillery was better than being a ferrier so off we went.
Now he did 98% percent of the work, I did the math for him on the cone flat patterns and chip formed the small cone on the swans neck for him.
Copper is fairly new to me, more used to aerospace alloys.
My buddy decided that a legitimate distillery was better than being a ferrier so off we went.
Now he did 98% percent of the work, I did the math for him on the cone flat patterns and chip formed the small cone on the swans neck for him.
Copper is fairly new to me, more used to aerospace alloys.
Attachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
elkhtr
Member
- 502
- 12
- 18
- Location
- Stanwood, Wa.
.090 thick
Boy did we learn alot about working with this stuff.
69M35A2
New member
- 30
- 0
- 0
- Location
- Bladen County, NC
I just wanted to see what this thread is all about and I saw your welding and machining skills... I am speechless.