-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your 5 ton this week?
- Thread starter dezert ratt
- Start date
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Got some work done to her yesterday. I pulled the drivers seat out. It was getting kinda rusty under there. I sanded it down and put some paint on it. Made some brackets to install the new air ride seat. I still need to hook up the air to it. Just have to find a place to tap into.
Got some more work done on the tactical playground. I am going to Knob Creek Machine Gun Shoot for 6 days. My son loves the truck. So I figured I would give him a way to enjoy the truck even when it's sitting still.
I made a bracket that slides over the side of the bed with an arm on it and mounted a couple of swings. I made a bracket for the slide. I wanted to be able to attach the slide when the tailgate is down and when I have to half way down. When it's all the way down that was easy just have a bracket that slides in between the the bed and the gate. When it's half down the bracket hooks into the loop. Now I just need to clean up the welds and paint it. I think it will be a big hit.
Got some more work done on the tactical playground. I am going to Knob Creek Machine Gun Shoot for 6 days. My son loves the truck. So I figured I would give him a way to enjoy the truck even when it's sitting still.
I made a bracket that slides over the side of the bed with an arm on it and mounted a couple of swings. I made a bracket for the slide. I wanted to be able to attach the slide when the tailgate is down and when I have to half way down. When it's all the way down that was easy just have a bracket that slides in between the the bed and the gate. When it's half down the bracket hooks into the loop. Now I just need to clean up the welds and paint it. I think it will be a big hit.
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
Knob Creek is awesome! Seat looks nice in there too. Great you have your kids "attached" to your MV.Got some work done to her yesterday. I pulled the drivers seat out. It was getting kinda rusty under there. I sanded it down and put some paint on it. Made some brackets to install the new air ride seat. I still need to hook up the air to it. Just have to find a place to tap into.
Got some more work done on the tactical playground. I am going to Knob Creek Machine Gun Shoot for 6 days. My son loves the truck. So I figured I would give him a way to enjoy the truck even when it's sitting still.
I made a bracket that slides over the side of the bed with an arm on it and mounted a couple of swings. I made a bracket for the slide. I wanted to be able to attach the slide when the tailgate is down and when I have to half way down. When it's all the way down that was easy just have a bracket that slides in between the the bed and the gate. When it's half down the bracket hooks into the loop. Now I just need to clean up the welds and paint it. I think it will be a big hit.
Last edited:
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
My son loves the truck. So I figured I would give him a way to enjoy the truck even when it's sitting still.
//uploads.tapatalk-cdn.com/2016...4ca360dec3.jpg//uploads.tapatalk-cdn.com/2016...5d116b538d.jpg//uploads.tapatalk-cdn.com/2016...e58a8ed2dd.jpg
I made a bracket that slides over the side of the bed with an arm on it and mounted a couple of swings. I made a bracket for the slide. I wanted to be able to attach the slide when the tailgate is down and when I have to half way down. When it's all the way down that was easy just have a bracket that slides in between the the bed and the gate. When it's half down the bracket hooks into the loop. Now I just need to clean up the welds and paint it. I think it will be a big hit.
Very clever.
//uploads.tapatalk-cdn.com/2016...4ca360dec3.jpg//uploads.tapatalk-cdn.com/2016...5d116b538d.jpg//uploads.tapatalk-cdn.com/2016...e58a8ed2dd.jpg
I made a bracket that slides over the side of the bed with an arm on it and mounted a couple of swings. I made a bracket for the slide. I wanted to be able to attach the slide when the tailgate is down and when I have to half way down. When it's all the way down that was easy just have a bracket that slides in between the the bed and the gate. When it's half down the bracket hooks into the loop. Now I just need to clean up the welds and paint it. I think it will be a big hit.
Very clever.
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
Your outrigger swing-set is one terrific creation!
But you better hide it once he hits his teens and gets the driver's license.
Because you just know him and his buddies will want to try it out in motion (it's what boys do).
But you better hide it once he hits his teens and gets the driver's license.
Because you just know him and his buddies will want to try it out in motion (it's what boys do).
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Funny you should say that. I told my nephew yesterday I was going to put my son in it and drive him around the hay field.
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
You made me laugh. That IS funny. We're a mess.Funny you should say that. I told my nephew yesterday I was going to put my son in it and drive him around the hay field.
ross165123
Member
- 134
- 3
- 18
- Location
- hickory nc
Found this guy yesterday and 2 big cams. talked to the owners wife and left my number.
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
That tractor was just sitting there by the side of the road!?
Is that a private road or a State road?
ross165123
Member
- 134
- 3
- 18
- Location
- hickory nc
Its on private property at the very edge of the appomattox-buckingham state forest. but yes that is a state road.
ross165123
Member
- 134
- 3
- 18
- Location
- hickory nc
I'm hoping the owner will sell me the hard top, spare tire carrier, and a few of the old bud rims he has laying around.
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
Well, I sure hope he would, and for peanuts too (if anything at all, and you're a good man to make him the offer).
Because it seems pretty clear he's following the ashes-to-ashes/ dust-to-dust protocol, and means to just let it return to the earth "from whence it came".
Because it seems pretty clear he's following the ashes-to-ashes/ dust-to-dust protocol, and means to just let it return to the earth "from whence it came".
red
Active member
- 1,988
- 25
- 38
- Location
- Eagle Mountain/Utah
Nah, he's gonna rebuild it someday
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
Maybe so, but a few more years of waiting and likely it'll be something like this that he has to work with:
red
Active member
- 1,988
- 25
- 38
- Location
- Eagle Mountain/Utah
I agree, just the excuse many people make
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
Oh, you were kidding; DUH, I should have known that!
I mean, you know tinwoodsman could probably resurrect a perfectly new-looking truck out of that dustpan.
But most of us aren't Superhero Saintly Immortals like him.
I mean, you know tinwoodsman could probably resurrect a perfectly new-looking truck out of that dustpan.
But most of us aren't Superhero Saintly Immortals like him.
- 1,450
- 120
- 63
- Location
- Gray, GA
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
Today the "apprentice) Fitted a cab light, and a rear view camera. An inverter in the cab (24-240 volt) as this was a spare outdoor surveillance unit, and a twin power outlet socket (U.K. 3 Pin 240 v.) for that camera and screen unit, Under the dash. Checked air tanks for water. Bizy bee..A Good lad.
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Getting the tactical playground painted. Using the Behr from Home Depot
Another Ahab
Well-known member
- 18,003
- 4,563
- 113
- Location
- Alexandria, VA
