coachgeo
Well-known member
- 5,082
- 3,404
- 113
- Location
- North of Cincy OH
I did search first. If I missed a good thread on topic in my search feel free to just hit me over the head and hint at a link or better search terms. (I used google adv. search)
Anyway..... am going to end up with two sets of hubs. One on the truck is for basically Road Racing
via a Hub Reduction Elimination you could say. (more on that later) and the other set is Stock
.
Can one just pull each complete hub and swap it with the other without major special equipment and/or without disassembling each hub piece by piece in order to remove it completely and do reverse for hub replacing it? Am going to guess complete disassembly/reassembly is required... but one could always hope.
Anyway..... am going to end up with two sets of hubs. One on the truck is for basically Road Racing
![Driver :driver: :driver:](https://www.steelsoldiers.com/images/smilies/driver.gif)
![Tank :tank: :tank:](https://www.steelsoldiers.com/images/smilies/tank.gif)
Can one just pull each complete hub and swap it with the other without major special equipment and/or without disassembling each hub piece by piece in order to remove it completely and do reverse for hub replacing it? Am going to guess complete disassembly/reassembly is required... but one could always hope.
Last edited: