Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Man, it's so pretty. That is a beautiful rig. ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
Are you planning to work it regular, Evil PC?
Are you planning to work it regular, Evil PC?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
The VTCS m756a2 Pipeline Truck
- Thread starter Evil Dr. Porkchop
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Outstanding work guys. My favorite deuce of all time and consequently, the one with the most lights from the factory.
- 1,965
- 279
- 83
- Location
- Colchester, VT
Thanks. It will really only see work occasionally, for towing home an MV bigger than a 1 ton truck or lifting or winching something that a smaller truck can't handle. Even though I've got forklifts to use at the shop I'll use the m756 to lift some things here and there just to get some pictures and to get some time using the winch.Man, it's so pretty. That is a beautiful rig.
Are you planning to work it regular, Evil PC?
Thanks Kenny. Is definitely different to see an a2 so well lit up at night. With the added front clearance lights and the front buckets on as running lights we've got 20 lights on at night versus 4 on a stock m35a2.
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
Hmmm...its smoking.....that's ok.....I know you want that LDS in there 
- 1,965
- 279
- 83
- Location
- Colchester, VT
It would be nice! We're happy with the good running LDT right now, although the cool factor of the whistler turbo has almost worn off as usual.Hmmm...its smoking.....that's ok.....I know you want that LDS in there
It's been a busy week with work on the truck. The engine hoses are done, as well as an oil change and new fuel filters. I also swapped out the 5 rubber brake lines for new ones. We weren't expecting to but we had to rebuild the airpack today and we put in a new master cylinder while we were at it. Everything seemed to be working good so we took it on the road for the first time, just for a quick trip around the block this evening. It drives like a deuce!
A couple pics even though the truck still looks the same:
The plastic water can on the running board is period correct of course.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's not a problem!
Can't get enough of it, because it just looks so good.
- 1,965
- 279
- 83
- Location
- Colchester, VT
The new bed wood made it on the truck today. We still need to paint the tops of the metal strips and finish bolting them down all the way.
- 1,965
- 279
- 83
- Location
- Colchester, VT
Some pictures from the last few days, towing a couple m135s. Only about 50 miles worth of driving but everything is great. The smoke cleared right up with some drive time.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Not only is it museum-quality perfect, but you put it through the paces as a mule-in-the-traces working vehicle to boot.
It just doesn't get better than that.
- 1,965
- 279
- 83
- Location
- Colchester, VT
Museum-quality may be pushing it a bit. There are still a bunch of touch ups to be done, and a lot of clean up and paint work to be done underneath. I'm just happy to have it on the road for now, in "work truck condition".
Here are some pictures from this morning, loading a Gama Goat carrier on my trailer for delivery this weekend. I'm really liking this truck!
Here are some pictures from this morning, loading a Gama Goat carrier on my trailer for delivery this weekend. I'm really liking this truck!
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That thing is a Beast!
- 1,965
- 279
- 83
- Location
- Colchester, VT
More lifting with the gin poles:
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That truck looks real pretty when she's working. That's what she was meant to do!
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I'm sure George is looking down giving a huge thumbs up to you guys on an excellent job with the oilfield truck.
scottjhl
New member
- 136
- 1
- 0
- Location
- Loxahatchee, FL
Amazing job on the Resto!
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
Great Job Guys, Iam sure George is happy that its back together ! Andy in landaff NH
59apache
Chipmaker
- 1,299
- 29
- 48
- Location
- Bavaria / Germany
Good job! Looks really good, i'm jealous
Fredo Corleone
Member
- 525
- 15
- 18
- Location
- Colchester, Vermont
Setting the poles.
https://youtu.be/T0R1aSHRHQg
https://youtu.be/T0R1aSHRHQg
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's just SO sweet. Makes a body want to go out and do some work!
- 1,965
- 279
- 83
- Location
- Colchester, VT
Thanks for the comments everyone. I too think George would be happy to see this truck back in VT, and back in use. Now that it is operational work on it has slowed down. Eventually we'll fix up and paint the cargo box and the racks and bows.
Even though most of these have been posted in other threads on SS here are a few more pics of it lifting stuff lately:
We also used it last weekend to tow home and then put together another deuce. This one is an m59 dump that was also a VTCS truck, a friend said that back in the late 1990s it used to sit next to the m756a2 in the yard. I'm going to ask around and see if I can find a pic of the two trucks together back then.opcorn:
Even though most of these have been posted in other threads on SS here are a few more pics of it lifting stuff lately:
We also used it last weekend to tow home and then put together another deuce. This one is an m59 dump that was also a VTCS truck, a friend said that back in the late 1990s it used to sit next to the m756a2 in the yard. I'm going to ask around and see if I can find a pic of the two trucks together back then.
opcorn: