• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

#32 M1008 Project time again at Zouts

swiss

Well-known member
Steel Soldiers Supporter
2,731
856
113
Location
Oakwood, Ga
OK - Recommended Swiss to wash the CUCV with WILD DOG before bringing it down this Friday which he did. This will help remove anything sitting in the pores of the CARC paint - DO NOT USE THIS ON REGULAR PAINT unless you just want to see all bare metal after you rinse this off after 20 minutes - it is that good.
Here are pics of it washed before he ships it down - then project starts
These are the pictures before washed. I will post up washed pictures later.

I love Hitches, never know what you need to pickup on the side of the road :)
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Drivers side - hood - started on pass side sanding. All the accessories are removed except the brush guard that comes off tomorrow. Inside of the entire box yet needs to be sanded. Interior of which Swiss almost had gutted is now removed for sanding yet.
Seeing as the afternoon weather is very nice down here I may just get the box exterior in 2K Epoxy High Build Primer today. A few little dings in the body but nothing big to get flattened out after primer is on.

Still have a lot of masking to do once the sanding is finished - could possibly see it all in primer by the weekend - see how it pans out.
20161113_104137_001.jpg20161113_104146_001.jpg20161113_113253_001.jpg20161113_121717_001.jpg20161114_095621_001.jpg20161114_095630.jpg20161114_111026_001.jpg20161114_111038_001.jpg20161114_121535_001.jpg
 

papabear

GA Mafia Imperial 1SG
13,520
2,464
113
Location
Columbus, Georgia
Might have to load up BabyBear in the M151A2 and pay a little visit tomorrow afternoon. He and Molly can play while we tell lies etc.:papabear:
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
856
113
Location
Oakwood, Ga
So Commander Zout finally gets to kick out the Veteran Day parade crowd on Sunday around noon. Then BAMB

1.) runs to paint store and gets all necessary supplies
2.) removes all accessories and rips out interior
3.) starts sanding all the exterior
4.) By today we have a coat of primer on the rear bed
5.) Posts pictures of VA Parade
6.) Posts pictures of Build 32
7.) Drinks sponsor liquids and refreshments
8.) Puts up with all my texts with specific orders and questions in between all activity

WOW Warp Speed

If you think about this all of this is done in less than 48 hours total duration.
 
Last edited:

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
You left out I had to throw Molly's frisbie for bout an hour as well in between all that...or she would have chewed my airline to pieces getting my attention.
 

papabear

GA Mafia Imperial 1SG
13,520
2,464
113
Location
Columbus, Georgia
You left out I had to throw Molly's frisbie for bout an hour as well in between all that...or she would have chewed my airline to pieces getting my attention.
An hour? That's not even enough to make that high-strung puppy want to take a five minute nap!!rofl
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
Exterior box all sanded - primered in 2k epoxy primer - re-sanded - dents repaired and back in 2k epoxy again - then need block sanding again.
Box interior all sanded - primered in 2k epoxy primer - still within my window without sanding to shoot paint in it today.
Then start sanding the cab interior - then get it masked up and into the same primer.
20161115_100850_001.jpg20161115_110753_001.jpg20161115_124910.jpg20161115_124920_001.jpg20161116_130101_003.jpg20161116_130109_002.jpg20161117_102611_001.jpg
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
856
113
Location
Oakwood, Ga
The double hitches allow a portable receiver winch to be on the top so you can pull items into the trailer which is on the bottom


Sent from my iPhone using Tapatalk
 
Top