Shift indicator for the 4L80E

[bobwire]

Does anyone now where to find the shift indicator for the 4L80E?
I cant find them anywhere.

 

[erasedhammer]

Does anyone now where to find the shift indicator for the 4L80E?
I cant find them anywhere.

Do you mean the Transmission Warning Lamp?

Cause if so, I got mine here:
http://www.eriksmilitarysurplus.com/twainliforhm.html

 

[tomelroy]

Are you talking about the P R D D 21 indictor/light? orscheln makes the shifter, but i dont think they make the indicator light. (their distributors dont sell it separately anyway). Everyone is out of stock who does sell the indicator/light and the current price is just under 200.00!

 

[bobwire]

No not the transmission light. The PRNDD21 shift indicator.
I guess I will try to use this. Hopefully it will look close to OEM.
http://www.impalas.com/1964-impalass-auto-floor-shift-indicator-lens-overlay-od.html

 

[MaverickH1]

Let me know how it works out for you. Mine has always been burned out, and it'd be nice to have it.

 

[Wire Fox]

My worry here is 12V vs 24V. If it's LED, you'll have to step it down at the connection point. If it's incadescent, then we can just change the bulb.... Secondary worry is water resistance. Last I checked, Impalas weren't built for water fording, so it's just another step that might have to be taken.

 

[MaverickH1]

My worry here is 12V vs 24V. If it's LED, you'll have to step it down at the connection point. If it's incadescent, then we can just change the bulb.... Secondary worry is water resistance. Last I checked, Impalas weren't built for water fording, so it's just another step that might have to be taken.

I haven't actually gotten a chance to open this up. Is there a bulb in the assembly that can easily be changed out? Is there one in the transfer case indicator as well? Are they all fiber optic?

BA9s style bulb?

 

[bobwire]

I think its just an emblem with no light on it.
I have the original lighted 3 speed indicator so once I get it, I will try to combine the emblem with it.
Or maybe put a 24v led on the shift lever pointed down? IDK...Ill figure something out and advise.

 

[Wire Fox]

I haven't actually gotten a chance to open this up. Is there a bulb in the assembly that can easily be changed out? Is there one in the transfer case indicator as well? Are they all fiber optic?

BA9s style bulb?

Negative. The parts manual kinda makes it look like that's the case, but the original HMMWV one is a strip of LEDs. Honestly, the parts manual is a bit of a cluster for the 4-speed shifter, because it's showing a configuration out of an H1 (notice that the shape is different, and there is a lighted transfer case selector). The comment I made early was supposed to be questions about the Impala unit and how it's assembled.

 

[LouWon]

Check fleabay,

 

[LouWon]

I know , wrong indicator, sorry.

 

[86humv]

This is what goes wrong sometime on these....resistors burn out.

 

[bobwire]

The Impala one was on back order so i ordered one of these.

https://www.summitracing.com/parts/...pMdqcPlsVYzEpjkg_DO--gCjvaQxkIJe2MaAo0I8P8HAQ

Its just a metal decal i think.

 

[bobwire]

So the indicator showed up. Its a little smaller than I expected but it will do for now.



It lines up not too bad for P,R,ND. Tranny is in drive here. It starts to get out of line on 3, 2, and 1.

 

[86humv]

I have an inop one available...led's dont work.
But good for looks.

 

[tomelroy]

I will take it!

 

[bobwire]

****....
If you have 2 available, I would like one too.

 

[86humv]

bobwire, tomelroy..PM sent
[ These are for the 4 spd. shifter ]

 

[Markr]

I have an inop one available...led's dont work.
But good for looks.
View attachment 678490

Is it still for sale

 

[Markr]

My email is ronaldrose1956