• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M1078 old to new style air dryer install

Plasa

Well-known member
250
313
63
Location
Italy
Hello!
Does someone tried to move the air dryer inside the frame? Need the place for a second fuel tank...
Or any other idea where put it?
Thanks a lot and regards from Italy?

Christian
 

Givinup

New member
135
4
0
Location
Oklahoma City
Hello!
Does someone tried to move the air dryer inside the frame? Need the place for a second fuel tank...
Or any other idea where put it?
Thanks a lot and regards from Italy?

Christian
I've modified the exhaust on my truck, and have moved the air dryer inside the frame rail, where the previous heat shield for the exhaust was.

Most air lines fit without any new ones needed. Haven't installed the new dryer yet because I'm too lazy to drive down and get it where it's being stored, but mounts etc are good to go.

Sent from my SM-G955U using Tapatalk
 

Plasa

Well-known member
250
313
63
Location
Italy
Hello Givinup!
That sounds great! I will check it, get my M1078 only in march/april, still in planing mode...

Thanks!
Christian
 

Givinup

New member
135
4
0
Location
Oklahoma City
Hello Givinup!
That sounds great! I will check it, get my M1078 only in march/april, still in planing mode...

Thanks!
Christian
I'll post pictures when I finish it.

For a second tank, check out the design of excap. De and their steyr. I love that design for tanks.

Sent from my SM-G955U using Tapatalk
 

Givinup

New member
135
4
0
Location
Oklahoma City
Thank you! Yes they are great but not really cheap :cry:
Yeah based on the look I can't imagine they are. There are some custom tank manufacturers here that can fabricate tanks and you give them the dimensions. I may go that route. If I do I'll share who I use, price, etc

Sent from my SM-G955U using Tapatalk
 

Awesomeness

Well-known member
Steel Soldiers Supporter
1,811
1,508
113
Location
Orlando, FL
I'm about to start this, and I'm a little curious because it looks like each of the sets of install photos in this post show the universal bracket notched and used a different way. One person only gets 3 bolts in, another person had to add slots to one of the sets of holes, and it looks like all 3 might be using a different set of holes for the bolts.

Can it be installed with 4 bolts, without enlarging/slotting any of the holes in the brackets (but still cutting the notch in the corner)?
 

Suprman

Well-known member
Supporting Vendor
6,832
645
113
Location
Stratford/Connecticut
On a 6x6 you can usually get 4 bolts no notch. 4x4 3 bolts and the notch. Could vary between trucks though. Just what I have encountered in the past.
 

Awesomeness

Well-known member
Steel Soldiers Supporter
1,811
1,508
113
Location
Orlando, FL
That's kind of funny, because we literally take the "universal" mounting plate, which doesn't fit, and then notch and slot it. What a waste.
 

DiverDarrell

Member
Steel Soldiers Supporter
629
17
18
Location
Port orchard, WA
Could always change the location, drill new holes in the frame, and use the bracket as is. Or build a bracket from scratch. I think of it rather as converting a universal part into a milspec one :beer:
 

Suprman

Well-known member
Supporting Vendor
6,832
645
113
Location
Stratford/Connecticut
If you look at the mounting plate style of the m939 abs air dryers. And the mounting bracket that comes with that style air dryer, with band clamp and bolt. Which is the previous generation to the mrap pur-est dryer. The haldex universal bracket is designed to mount up to the m939 style mounting plate.
 

ramdough

Well-known member
1,554
1,727
113
Location
Austin, Texas
The install on my truck was straightforward: for some reason I did not experience the difficulties described by others ;)View attachment 825438
I love watching your truck build. Wish I had room for an extra toy to make a rock crawler.

One thing I read on the dryer install instructions was that you need a minimum length of line between the compressor and a down slope to the dryer. This is to help keep air cooler and condensation running away from the compressor. I can’t tell what you have, but may be worth verifying.

Truck looks like a lot of fun.


Sent from my iPhone using Tapatalk
 

engem002

New member
5
0
1
Location
Nierstein/Germany
Hi*,
I would also like to replace my old air dryer with a new one.
Does any of you know whether the air dryer "Haldex DA34200 Purest® Air Dryer with Econ" (https://www.haldex.com/globalassets/north-america/documents/air-dryers-_-air-line/l31170.pdf ) for the M1078A0 also works?
I ask because I can get this one for free from a friend. The DA34200 is for type E or QE compressors. I have a Midland compressor in the A0, model EL 1600, type piston-type, two-cylinder.
Don't know what type E means and whether my compressor is type E.

Thank you for your help and stay healthy,
Martin
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks