rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
I had a little time recently, so I made up a bracket to hold my MRE Heater between the seats.
I cut it out of some 10 gauge plate and bent it up using my vise and a 3 Ibs hammer. After welding and grinding and drilling out the holes, I mounted it on the deuce back wall between the seats using "rivnuts" . Now tomorrow if the weather stays nice I'll paint it.
I cut it out of some 10 gauge plate and bent it up using my vise and a 3 Ibs hammer. After welding and grinding and drilling out the holes, I mounted it on the deuce back wall between the seats using "rivnuts" . Now tomorrow if the weather stays nice I'll paint it.