rustystud
Well-known member
- 9,184
- 2,760
- 113
- Location
- Woodinville, Washington
I had a little time recently, so I made up a bracket to hold my MRE Heater between the seats.
![002.jpg 002.jpg](https://www.steelsoldiers.com/data/attachments/487/487538-1161482f1936ff830ee5e433d7a270e1.jpg)
![006.jpg 006.jpg](https://www.steelsoldiers.com/data/attachments/487/487539-32a88e1f8c351f5f5ca4847c8c340cd7.jpg)
![010.jpg 010.jpg](https://www.steelsoldiers.com/data/attachments/487/487541-fed46fc50f49717dc87b3eb9cff1d0cc.jpg)
![011.jpg 011.jpg](https://www.steelsoldiers.com/data/attachments/487/487542-04f05ab221ed27398f0f928389ccc815.jpg)
![015.jpg 015.jpg](https://www.steelsoldiers.com/data/attachments/487/487543-4456d1fa2d0b97282c22943359d9e4fe.jpg)
![016.jpg 016.jpg](https://www.steelsoldiers.com/data/attachments/487/487544-878ddc2e3f3290089c243ad607a05684.jpg)
![020.jpg 020.jpg](https://www.steelsoldiers.com/data/attachments/487/487545-d3bbd6a41f7b433964539cc73be70ad2.jpg)
![002.jpg 002.jpg](https://www.steelsoldiers.com/data/attachments/487/487546-37a9e952e4a5475872b4bcc5bf9be6a4.jpg)
![007.jpg 007.jpg](https://www.steelsoldiers.com/data/attachments/487/487547-5eeaab75ccbdc7b456494aa0a1947fc5.jpg)
I cut it out of some 10 gauge plate and bent it up using my vise and a 3 Ibs hammer. After welding and grinding and drilling out the holes, I mounted it on the deuce back wall between the seats using "rivnuts" . Now tomorrow if the weather stays nice I'll paint it.
![002.jpg 002.jpg](https://www.steelsoldiers.com/data/attachments/487/487538-1161482f1936ff830ee5e433d7a270e1.jpg)
![006.jpg 006.jpg](https://www.steelsoldiers.com/data/attachments/487/487539-32a88e1f8c351f5f5ca4847c8c340cd7.jpg)
![010.jpg 010.jpg](https://www.steelsoldiers.com/data/attachments/487/487541-fed46fc50f49717dc87b3eb9cff1d0cc.jpg)
![011.jpg 011.jpg](https://www.steelsoldiers.com/data/attachments/487/487542-04f05ab221ed27398f0f928389ccc815.jpg)
![015.jpg 015.jpg](https://www.steelsoldiers.com/data/attachments/487/487543-4456d1fa2d0b97282c22943359d9e4fe.jpg)
![016.jpg 016.jpg](https://www.steelsoldiers.com/data/attachments/487/487544-878ddc2e3f3290089c243ad607a05684.jpg)
![020.jpg 020.jpg](https://www.steelsoldiers.com/data/attachments/487/487545-d3bbd6a41f7b433964539cc73be70ad2.jpg)
![002.jpg 002.jpg](https://www.steelsoldiers.com/data/attachments/487/487546-37a9e952e4a5475872b4bcc5bf9be6a4.jpg)
![007.jpg 007.jpg](https://www.steelsoldiers.com/data/attachments/487/487547-5eeaab75ccbdc7b456494aa0a1947fc5.jpg)
I cut it out of some 10 gauge plate and bent it up using my vise and a 3 Ibs hammer. After welding and grinding and drilling out the holes, I mounted it on the deuce back wall between the seats using "rivnuts" . Now tomorrow if the weather stays nice I'll paint it.