Triton
Active member
- 233
- 74
- 28
- Location
- Houston, Texas
Finally got a chance to start on this well nut fix but I can't seem to find out where it is, do I have to remove the whole tank? I do see a well nut fitting on top of the tank but that shouldn't leak. After looking at some pictures on some post here I found a similar place on my 803 but there is no well nut (see pic). The hose that is connected to the fuel pump
comes from the top of the tank, I don't know where the fuel drain is connected.
![IMG_0374.JPG IMG_0374.JPG](https://www.steelsoldiers.com/data/attachments/483/483849-b945ceb2d9b98e501b73f28d6f605812.jpg)
![IMG_0382.JPG IMG_0382.JPG](https://www.steelsoldiers.com/data/attachments/483/483850-d96cadb812934317f7287997d1a39e33.jpg)
comes from the top of the tank, I don't know where the fuel drain is connected.
![IMG_0374.JPG IMG_0374.JPG](https://www.steelsoldiers.com/data/attachments/483/483849-b945ceb2d9b98e501b73f28d6f605812.jpg)
![IMG_0382.JPG IMG_0382.JPG](https://www.steelsoldiers.com/data/attachments/483/483850-d96cadb812934317f7287997d1a39e33.jpg)