MEP-803A Spare Parts

[maniatopoulosg]

I just uploaded two documents concerning Grounding and Bonding. You will find them in the TM upload section, until an Administrator puts them in the Generator Forum.

Can you please tell me what I’m doing wrong I can’t open them



Sent from my iPhone using Tapatalk

 

[Zed254]

Can you please tell me what I’m doing wrong I can’t open them

Double click them. They are .pdf files. At least that's what I did......

 

[maniatopoulosg]

Load supply cable
What gauge wire is everyone using on the MEP 10kw
Aluminum or copper?
Sooj or soow? Or ser or outdoor Romeo
I asked about aluminum wire because I had seen someone use. 2\2\2\4 ser wire
I know probably none of this is code
I’m just trying to pick everyone’s brain

 

[Zed254]

4 conductor 6 AWG SOOW copper. https://www.sjoow.com/6-4-soow-600-volt.html

Shop around for price. I just pulled that off the net to confirm my verbiage.

 

[maniatopoulosg]

4 conductor 6 AWG SOOW copper. https://www.sjoow.com/6-4-soow-600-volt.html

Shop around for price. I just pulled that off the net to confirm my verbiage.

How many amps can each conductor support , would you oversize for 50 food distance?


Sent from my iPhone using Tapatalk

 

[Zed254]

Search 'Ampacity chart SOOW' and click this: https://www.stayonline.com/product-resources/reference-circuit-ampacity.asp

In an 803A you will have 2 conductors hot, a neutral, and a ground.....for single phase, 240 volt service.

 

[smokem joe]

I'd use 4 gauge copper if in conduit. It's good for 80 amps and will have less voltage drop. For a flexible cord use type W power cable. 6 gauge 4 conductor is good for 87 amps