Fuel Filter Housing Reassembly Assistance

[dispatcher1011]

M35A2, 1972, White LDT465.

I took apart my fuel filter housings to completely clean them inside and out.

I bagged and tagged the parts. (Washers, springs, cotter)

I cleaned the **** out of all three housings. (Two on the motor, one on the framerail)

I do not remember the sequence for reassembling the three of them. (Takes 3511 and 3512 NAPA filters)

I remember where the O-rings and such go; it's the inside parts of the housings I'm at a loss for.

Does anyone have a good diagram or reassembly instructions?


** I know I need to convert this to spin on filters. It's on the list. I'm not any happier than any of you about this. Probably will add a coolant filter then, too. Trying to get it back and running for now.**

 

[Privatewrench]

Check this out Dispatcher. Should have what you need.

 

[dispatcher1011]

I do not have the correct series of manuals for this. Thank you very much Privatewrench.

 

[WillWagner]

I do not have the correct series of manuals for this. Thank you very much Privatewrench.

Available for free here in the TM section