• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Fuel Filter Housing Reassembly Assistance

153
0
16
Location
NW PA/ Warren County
M35A2, 1972, White LDT465.

I took apart my fuel filter housings to completely clean them inside and out.

I bagged and tagged the parts. (Washers, springs, cotter)

I cleaned the **** out of all three housings. (Two on the motor, one on the framerail)

I do not remember the sequence for reassembling the three of them. (Takes 3511 and 3512 NAPA filters)

I remember where the O-rings and such go; it's the inside parts of the housings I'm at a loss for.

Does anyone have a good diagram or reassembly instructions?


** I know I need to convert this to spin on filters. It's on the list. I'm not any happier than any of you about this. Probably will add a coolant filter then, too. Trying to get it back and running for now.**
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks