- 240
- 25
- 28
- Location
- Live Oak, Florida, USA
Four of the six LDT-465 pistons have various sized grooves at the
lip of their cups. Anyone have an idea the cause of this? Is it
fixable or must piston be replaced? Seems injectors' spray is not
getting into cups properly. Is there a way to correct this?
Any ideas where I can get new pistons if needed?
Engine only has about 22,000 miles.
See picture.
Thanks for all your comments,
Orren![Deuce Piston Damage.jpg Deuce Piston Damage.jpg](https://www.steelsoldiers.com/data/attachments/532/532770-18bb59e81fc713eaf8cebc6e39e02288.jpg)
lip of their cups. Anyone have an idea the cause of this? Is it
fixable or must piston be replaced? Seems injectors' spray is not
getting into cups properly. Is there a way to correct this?
Any ideas where I can get new pistons if needed?
Engine only has about 22,000 miles.
See picture.
Thanks for all your comments,
Orren
![Deuce Piston Damage.jpg Deuce Piston Damage.jpg](https://www.steelsoldiers.com/data/attachments/532/532770-18bb59e81fc713eaf8cebc6e39e02288.jpg)