Landbarger
Member
- 246
- 6
- 18
- Location
- Patrick County, VA
Do you have any pictures? Sounds like we have the same specific version of M101.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your trailer today.
- Thread starter Floridianson
- Start date
- 1,330
- 586
- 113
- Location
- Quantico VA
Not M101, M116A2. I do have a stock M101 but not a radar support version (it’s in the classifieds)
Here is a pic of the M116
Bulldogger
Here is a pic of the M116
Bulldogger
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
They always seem so handy, so you left some of the tie-downs remaining, that right, BDGR?
What's your plan for the trailer, camping maybe?
- 1,330
- 586
- 113
- Location
- Quantico VA
Most of the tie downs were attached to the center tray so they came off. I did save them and their bolts of course.
I can add some back if I feel the need.
I plan to use use it for cargo mostly. If camping just as carry-all. Some folks do use the tray as a starter for a small bed, but not me.
Bulldogger
I can add some back if I feel the need.
I plan to use use it for cargo mostly. If camping just as carry-all. Some folks do use the tray as a starter for a small bed, but not me.
Bulldogger
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
You're always working on something, Bulldogger, you're made of good stuff.
To my drinking buddy!
- 1,330
- 586
- 113
- Location
- Quantico VA
Thanks Rocky. Just trying to keep busy.
BDGR
BDGR
Mustangsud
Active member
- 154
- 216
- 43
- Location
- Aubrey, TX (North DFW Metro)
New Paint. Ready for use.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's one great paint job, and a real nice color choice, too.
What's the use you got planned?
Mustangsud
Active member
- 154
- 216
- 43
- Location
- Aubrey, TX (North DFW Metro)
It’s going to carry a 1500 gph Tactical Water Purification Unit and Gen unit.
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Floridanson says I lost my mind, but I won 3 remanufactured M-353's here in Florida & picked them all up this morning. Pictures only if requested as I was busy loading & driving & forgot to do the pictures thing.
There were 39 of these units released @ the same time & they very well may be from California. There are a few trucks from California here in Florida, but it makes no sense why to truck them all the way across the country & put them up for auction.
Anyway here is a representative picture of one of the trailers.
There were 39 of these units released @ the same time & they very well may be from California. There are a few trucks from California here in Florida, but it makes no sense why to truck them all the way across the country & put them up for auction.
Anyway here is a representative picture of one of the trailers.
Last edited:
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
When I was in Yermo picking up my truck they were loading 2 flatbed semis full of those trailers, at least 8, maybe more.
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Got my extension for the M989A1. A friend had it made for me.
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Here are some pictures of the extension for the M989A1. I will paint it to match.
Sent from my webslinger using Tapatalk
Sent from my webslinger using Tapatalk
What was the purpose of this?Here are some pictures of the extension for the M989A1. I will paint it to match.
Sent from my webslinger using Tapatalk
Sent from my iPhone using Tapatalk
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
I washed my newest trailer. It was one of the HDT Drash trailers with a 35kw gen and 8 ton ECU on it. Guy I bought it from sold the gen separately, and took off the ECU as I don't have anything big enough to run it, and didn't want to spend the extra money to buy it.
I'm probably going to build a flatbed out of 11 gauge flat steel and 1" tubing, drop my MEP-802A and Nordicair 3 ton ECU pushed to the left side of the trailer, and haul my temper tent on the right side. Should balance out decently like that.
Bed will end up 10' long and 7' wide, only 54" between the wheel wells.
The fuel tank is still in it. 55 gallon tank. If I plumb it to the MEP-802A I should get 100 hours of run time off a full tank. More than enough for a long weekend of camping or whatever.
Edit: I had to steal the lights off my M116A2 and put a new trailer plug on it as the old one had been chopped off. Found a couple diagrams on this site for trailer wiring, and had a spare plug end lying around, so got to practice my soldering skills.
I'm probably going to build a flatbed out of 11 gauge flat steel and 1" tubing, drop my MEP-802A and Nordicair 3 ton ECU pushed to the left side of the trailer, and haul my temper tent on the right side. Should balance out decently like that.
Bed will end up 10' long and 7' wide, only 54" between the wheel wells.
The fuel tank is still in it. 55 gallon tank. If I plumb it to the MEP-802A I should get 100 hours of run time off a full tank. More than enough for a long weekend of camping or whatever.
Edit: I had to steal the lights off my M116A2 and put a new trailer plug on it as the old one had been chopped off. Found a couple diagrams on this site for trailer wiring, and had a spare plug end lying around, so got to practice my soldering skills.
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
The original trailer tongue was a tad too short
In sharp turns the trailer will make contact with the tow vehicle.
The Military came out with an extension kit to solve the problem.
The NOS kits were on eBay but I think the supply dried up.
Haven’t looked in quite a while.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
What are those trailers meant to haul?
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
big generators