• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

J- hook windshield wiper arm conversion

the skull

Member
289
12
18
Location
mt victory ohio
Any updates on this? It would make life easier. I hate the bayonet blades. With the new wipers available, they don't fit like they should, and I have lost one in the rain.
 

IdahoJoe

New member

Chaski

Active member
684
56
28
Location
Burney/CA
Any updates on this? It would make life easier. I hate the bayonet blades. With the new wipers available, they don't fit like they should, and I have lost one in the rain.
They fit.
Arms are a little longer than stock, but with 17” blades they swept just as low as the stock ones and an inch higher.

Update...Just drove 100 miles in the pickup this evening in a rain / snow storm. Wiper worked great. Was nice to be able to run a premium Bosch wiper assembly on it. I had one new arm with a Bosch blade and one old arm with a direct fit AC Delco for comparison. It’s nothing earth shattering but it is a novelty to be able to run the same blades that go on the wifemobile now.
 
Last edited:

Miah

Member
90
29
18
Location
Kansas City-ish, MO
I've got all the stuff in, but found a PO had taken the stock arms off & re-attached them somewhat cocked. Picked up a Lisle puller to help work them loose as soon as the spare time & weather conditions overlap. Hopefully will get this done to my truck soon-ish.
 

Mad Texan

Well-known member
Steel Soldiers Supporter
657
1,150
93
Location
Chester County, PA
I've got all the stuff in, but found a PO had taken the stock arms off & re-attached them somewhat cocked. Picked up a Lisle puller to help work them loose as soon as the spare time & weather conditions overlap. Hopefully will get this done to my truck soon-ish.
The puller will make it much easier!
 
Top