m35a2 boost guage install

[jzettek]

hey guys im planning to install a pyroneter and boost guage to my duece. i know where and how to do the pyrometer but how and where do i install a boost guage and what are the operating parameters im looking for for both guages? id apprieciate any advise thanks jim

 

[Slate]

I just put an isspro boost and pyro combo. On my truck. I think 12psi+/- max boost and 1200 max temp is right. Boost should fit right in top of intake there is a little threaded hole on top.

Sent from my moto z3 using Tapatalk

 

[Slate]

I just put an isspro boost and pyro combo. On my truck. I think 12psi+/- max boost and 1200 max temp is right. Boost should fit right in top of intake there is a little threaded hole on top.View attachment 796064

Sent from my moto z3 using Tapatalk

Isspro R609-10 Turbocator 300-1500°F Gauge

Sent from my moto z3 using Tapatalk
View attachment 796065

 

[jzettek]

thanks for the info that should make things allot easier for me im just trying to figure something out how i want to install the gauges now thanks again jim

 

[FLYWHEEL]

I also connected mine to the intake elbow, just had to remove the plug that was there.

 

[FLYWHEEL]

I installed the gauges on the steering tube, using some light brackets

 

[jzettek]

thanks i was thinking about something similar to that

 

[18operator]

This is how I configured my gauges.

 

[jzettek]

thanks for the pics i like that allot i think i might do the same thing thanks jim

 

[frank8003]

search box is your friend here....................

 

[cattlerepairman]

I used a Westach EGT and boost gauge

What did you do to your deuce this week?

...BTW Smoke, I forgot to show ya the dang ambulance light bar that came in the back of my truck. It's got 5 rotators, alley lights, a single amber flasher facing rear, and it works. I'm thinking mancave item! lol [thumbzup] :shock: ...darn that sounds cool. Its all good though, Like I...

steelsoldiers.com

Sent from my SM-G950W using Tapatalk

 

[M37M35]

Here's mine.

 

[jzettek]

very nice i like it! jim

 

[jzettek]

i know that 2600 rpm is the max rev. on these multi fuel engines but what would be a max rpm that you can sustain say like on the highway for an extended amount of time?

 

[M37M35]

i know that 2600 rpm is the max rev. on these multi fuel engines but what would be a max rpm that you can sustain say like on the highway for an extended amount of time?

Some people will run it at the max. I don't run mine higher than 2,200-2,300. Have run it for 750 miles and 16 hours at 2,200 RPM in one day when I first drove it home. No problems.

 

[jzettek]

Some people will run it at the max. I don't run mine higher than 2,200-2,300. Have run it for 750 miles and 16 hours at 2,200 RPM in one day when I first drove it home. No problems.

thanks that makes sense to me i think ill do the same with mine take care and be safe jim