jmumme
New member
- 6
- 0
- 1
- Location
- Woodinville, WA
In taking apart the LMTV cab, I found the Heater plug had melted. Was wondering if anyone knew where to purchase the 4-pin rubber electrical connectors? I find a lot of the single pin packard fittings, but not the 4 pin. Here are some pictures of the fitting. One is of the melted fitting, the other two are from behind the dash gauge panel and I believe are the same connector. Any help is appreciated! Thanks!![IMG_0795 (1).jpg IMG_0795 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552737-afdbca23d7a0b2c3fe2a8aef1abd2658.jpg)
![IMG_0794 (1).jpg IMG_0794 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552738-5bfb6e4da3cffbd3b37bee301669f75b.jpg)
![IMG_0793 (1).jpg IMG_0793 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552739-64cf1fa0c4f883dc24657671ebecba14.jpg)
![IMG_0795 (1).jpg IMG_0795 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552737-afdbca23d7a0b2c3fe2a8aef1abd2658.jpg)
![IMG_0794 (1).jpg IMG_0794 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552738-5bfb6e4da3cffbd3b37bee301669f75b.jpg)
![IMG_0793 (1).jpg IMG_0793 (1).jpg](https://www.steelsoldiers.com/data/attachments/552/552739-64cf1fa0c4f883dc24657671ebecba14.jpg)