• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M37 Winch

msw0932

New member
14
0
1
Location
Rochester/New York
So I'm thinking about starting up the monumental process of locating all the items I need to bolt on a Braden LU-4 winch to my M37. I know all the bits and pieces I will need, and will have to dig deep to locate all the miscellaneous items.

Does anyone have an idea of how much this is going to run me to buy ALL the pieces, parts, bolts.... anything/everything needed to turn my truck from W/OW TO W/W. (winch, bumper ends, extension brackets, driveshaft, PTO unit, engagement lever, locking plate, winch data plate... and anything else I might be missing)

Looking to see what this is going to cost me.

Thoughts, ideas... please.

Thanks.


Sent from my iPhone using Tapatalk
 

USMC4302

New member
137
0
0
Location
So. MD
FWIW, I bought a parts truck for $1,400. Harvested all the winch/PTO parts and resold the truck (now WO/W) for $900. Spent another $350 on cable and misc repair parts (winch was kinda beat up and needed new worm gear shaft bearings and a new brake band housing).

So probably roughly $1,000 once the truck was sitting there with the winch all nicely installed, painted and ready for tasking.
 

foxtrk2

Member
153
4
18
Location
foxboro ma
I agree with sgt major last spring I sold the complete set up fo r 1000 at the new Hampshire show and according to most I gave it away at that price
 

m715

Member
237
16
18
Location
western ma.
Buying a parts truck with a winch is what I did. But you have to find a truck then get it home. Finding all the parts and shipping takes lots of time, but having a truck to pick parts from helps a lot. Selling or trade parts helps you meet other people into mv .
 

just me

Member
322
10
18
Location
phoenix,az
I have a winch truck. Everything was there. But still spent over $700 on fully restoring it. The most difficult thing to find was the joints for the drive shaft. Since you are starting with nothing, factor in the PTO and controls and a clutch and trans rebuild. You will want the trans out on the bench to install the PTO and "while you're in there".
 

CombatJack

Member
91
12
8
Location
Texas
I have NOS LU-4 Winches still in the crates if anyone needs one. Just shoot me a PM, I can try to figure out shipping for it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks