New to Forum. Need help with a dimension.

[OGRE]

I purchased my first HMMWV about two years ago and outfitted it as a 4 door soft top. I drive it here in Florida almost always without doors. I purchased a M1102 Trailer from Gov planet just in case I need one.
I just bought another HMMWV, A 1994 M998 from West Kentucky Surplus and had them add a slantback kit and have started the build process to clean it up and make everything work. It is quite a project but I enjoy the work. I have the manuals and have been acquiring all the parts I need but the manuals don't show everything. I have to install all the parts to make the cargo Shell door work on a vehicle that did not originally have those parts. What I need now is the location of part # 5340011972716 which is the mounting bracket located on the edge of the truck bed that the cargo shell door piston attaches to. Can someone with a Weapons Carrier Body give me the dimension on how far in from the back corner I should mount it. I would imagine its location would be critical for the door to work. Here is a picture of my current project.
Thanks for whatever help you can provide.

 

[jkcondrey]

mounting bracket gas spring cargo door Slantback HMMWV, 72,50 €

mounting bracket gas spring cargo door Slantback HMMWV

www.globeworks.eu

EC12339611 / 01-197-2716 5340-01-197-2716 - BRACKET, HATCH GAS SPRING | Hummer Parts Guy (HPG)

www.hummerpartsguy.com

 

[OGRE]

Sorry if I was not clear enough. I have the brackets I need but I need a dimension on where to mount them. They mount on the top inside edge of the truck bed. How far in from the corner do they mount?

 

[TOBASH]

I drive an M1025, but she is in the shoppe.

What pic or dimension do you need? Take a pic with you pointing to what your talking about.

 

[OGRE]

I drive an M1025, but she is in the shoppe.

What pic or dimension do you need? Take a pic with you pointing to what your talking about.

I already recieved the information I needed. Thank you for the offer.