New 4L80 install

[Hmmv4me]

I am installing a 4L80e in my M998 and it is going to go in stages. First is get the trans in the truck and hook up the drivelines, hoses and shifter. The second will be getting the electronics hooked up. The question is, can you move it with all of the electronics disconnected? I ask because I am going to install it a friends shop with a lift and then move it to my shop to finish it up.

Thanks

 

[Retiredwarhorses]

Trans will be in limp mode...2nd gear, full pressure.

 

[Hmmv4me]

Trans will be in limp mode...2nd gear, full pressure.

So it won't hurt it to run it to get it on a trailer then? That is good news. I still have a few parts to source but wanted to get the project started.

Thanks

 

[Crapgame]

What parts are you short? The TCM protective housing with TCM module?

 

[Hmmv4me]

What parts are you short? The TCM protective housing with TCM module?

Still looking for the mounting plate, relay and breaker that go behind the passenger seat. Need the TCM and housing and still looking for an A2 6.5 N/A/4L80e body harness. Of course, when the parts start flying, I am sure I will run into other stuff and still waiting on my shifter from AMG.

 

[Hmmv4me]

And so it begins.... not off to a great start..the plug that connects the hood harness and body harness was seized tight. Had to snap it in half...