• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M998 A0 A1 A2?

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,862
9,503
113
Location
Papalote, TX
OK I am not trying to open the debate whether there is or is not a such thing as an A0, I think most understand the what is meant by that designation.
I am curious when the A1 came about, both my 1992 and 1993 M998s do not have an A1 on the data plates but for some reason I just took for granted, maybe incorrectly that they were A1s, I do not remember seeing a data plate with the A1 designation although that CERTAINLY does not mean they do not exist.
This is a carry over from another (AMG parts) thread that was getting a little off track
 

Milcommoguy

Well-known member
Supporting Vendor
1,706
2,255
113
Location
Rosamond, CA

Coug

Well-known member
Steel Soldiers Supporter
2,956
4,306
113
Location
Olympia/WA
The A1 designation didn't start until 1994, so your trucks wouldn't be labeled as such.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,862
9,503
113
Location
Papalote, TX
Hard to believe it was 8 years in service before its first major upgrade, both of mine have caliper mounted parking brakes (part of the service brakes)
I wonder if both were upgraded without the MWOs or if they came that way from the factory, the only MWO was on the 93 and it was for a pintle mount upgrade for a heavier trailer
 

jkcondrey

Active member
Steel Soldiers Supporter
317
140
43
Location
Rutherfordton, NC
I don't know about the a0 a1 a2 designations, but I am certain that when I go to register mine, I will do my best to get it done as an HMSUV lol
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,389
4,167
113
Location
Brentwood, Calif
Hard to believe it was 8 years in service before its first major upgrade, both of mine have caliper mounted parking brakes (part of the service brakes)
I wonder if both were upgraded without the MWOs or if they came that way from the factory, the only MWO was on the 93 and it was for a pintle mount upgrade for a heavier trailer
Just because you have all the MWO’s applied and no MWO dats plates means nothing....MWO’s were applied at all levels, Unit, OMS, Depot...etc
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,862
9,503
113
Location
Papalote, TX
Just because you have all the MWO’s applied and no MWO dats plates means nothing....MWO’s were applied at all levels, Unit, OMS, Depot...etc
If so how do they keep from repeating WMOs? my 93 has a splash of yellow paint on the steering arms on all four of the gear hubs Between the four retaining bolts, I am assuming this means someone serviced the locking tabs under them.
 

emmado22

Moderator
Super Moderator
Steel Soldiers Supporter
7,058
147
63
Location
Mid Hudson Valley NY
Packing brake MWO came out in 1991. I got to assume Uncle Sam modified the contract then to have units being produced with the "upgraded" parking brake.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks