• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

What have you done to your MTVR today?

Intel

New member
20
21
3
Location
SOCAL
Did you also end up cutting off the bed frame? I dont believe I saw it in the pic.
I cut off the front of the bed so it was even with the bed surface.
Did you also end up cutting off the bed frame? I dont believe I saw it in the pic.
I did cut off the front of the bed which can be seen in this photo.
 

Attachments

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
I was really lazy, and being the worlds worst procrastinator I didn’t touch my Sherpa 25k winch after blowing it up back in November at the rally; I sent pictures for warranty documentation to Sherpa and 9 days later I have everything needed to rebuild my winch. Although I over-worked the winch and killed it, They still took care of me because they stand behind their product. Very impressed, I’ll be releasing a video soon on this matter.IMG_4085.jpg


Sent from my iPhone using Tapatalk
 

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
I’ve hit a LOT of stuff on the road, from squirrels to deer, but tonight was scary as I topped a hill and found a full-grown COW running towards me. I managed to evade pretty well but sadly felt a little thud as just the very tip of my bumper touched it. I barely kept it under control trying to evade; Y’all be careful, it can all end in a second.IMG_4604.jpg
IMG_4607.jpg


Sent from my iPhone using Tapatalk
 

JW7tonWY

Active member
104
138
43
Location
Central Wyoming
I am jealous of your trailer, wished that for once others would not be able to spend more then I so I could get one to put my M715 on like you have your Hummer. I know All to Well it can all end in a second, my last near death experience involved deep gravel on a corner going way to close to 60...It took all the road and a bit of ditch and help from the Almighty to get it all pointing in the direction of travel again...
 

JW7tonWY

Active member
104
138
43
Location
Central Wyoming
Saturday May 8 , drove 460 miles round trip to the National museum of Military Vehicles in Dubois WY.


Museum.jpg
Two things they didn't Have a MTVR and M715 - He did have a M725...

Probably close to 1000 vehicles there from Pre WW1 to Vietnam and a few newer ones outside. Unbelievable collection including many firearms.

Pretty much everything in there runs too. Not a road side tourist trap - this is a World class Museum!
 

JW7tonWY

Active member
104
138
43
Location
Central Wyoming
Saturday May 8 , drove 460 miles round trip to the National museum of Military Vehicles in Dubois WY.


View attachment 834516
Two things they didn't Have a MTVR and M715 - He did have a M725...

Probably close to 1000 vehicles there from Pre WW1 to Vietnam and a few newer ones outside. Unbelievable collection including many firearms.

Pretty much everything in there runs too. Not a road side tourist trap - this is a World class Museum!
IMG_0208(2).jpg
perfect parking and timing for this reflection at a rest area on the way home...
 

Madball90

New member
29
23
3
Location
California
Hello, my name is Josh and I have an addiction..... bought a 3rd MTVR today and have yet to get any of the EUC’s cleared yet. Two non runners and a wrecked one for parts should make for an interesting learning curve for these trucks. I have pretty well mastered reviving other MV’s and have no idea what to expect with condition on these because there is not much info out there yet.
I used to work for Oshkosh on the MTVR now Inwork on them for the Marines in 29 Palms…. I have rebuilt them from the ground up as well….. my favorite is still the AMK-36
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks