Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
Thanks a lot, but i can't find the TM, got the link? I will directly save it and print it out
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Looking for specifications axis M101 A3 3/4
- Thread starter Ronald-Holland
- Start date
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
Thanks a lot, but i can't find the TM, got the link? I will directly save it and print it out
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
The wheel bearings are common civilian parts and they should be available to you over there also at an auto parts store. Do they still have the numbers that can be read? If so they should be able to cross reference.
If not. Let met know and I will post.
The other 2 items are military specific unfortunately. Cables do show up on ebay. If vendor will not ship, I would be glad to help.
If not. Let met know and I will post.
The other 2 items are military specific unfortunately. Cables do show up on ebay. If vendor will not ship, I would be glad to help.
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Someone, and right now my mind is empty, but someone here in the forum found cables. I will try and rattle my burned out brain and remember.
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
great, thanks a lot, by the way I bought the trailer near your place in Berching (Max Mobility)
Jeepadict
Well-known member
- 477
- 706
- 93
- Location
- Round Mountain, NV
The cables for these trailers are like hen's teeth! I got lucky to find an axle assembly a guy was discarding from an overland conversion build.
The handles were difficult as well until a couple months ago a SS member found a manufacturer for the more recent version, I recall the price being reasonable. (new-new, not NOS)
If your cable is in ill repair, perhaps a local crane/rigging shop might be able to replace the cable within the sheathing? It's probably a long shot.
The hub/brake assembly is made by a company named Dexter. The full assembly can be ordered directly from them or any US trailer parts website like Croft or eTrailer, tho the backing plate will be slightly different as the military was the only ones to use a parking brake with this set-up. This type unit is most commonly found on boat trailers.
If you need parts for the tongue surge brake assembly, contact Mendenhall Industries directly and they will help you get what you need.
Sent from my SM-G970U using Tapatalk
The handles were difficult as well until a couple months ago a SS member found a manufacturer for the more recent version, I recall the price being reasonable. (new-new, not NOS)
If your cable is in ill repair, perhaps a local crane/rigging shop might be able to replace the cable within the sheathing? It's probably a long shot.
The hub/brake assembly is made by a company named Dexter. The full assembly can be ordered directly from them or any US trailer parts website like Croft or eTrailer, tho the backing plate will be slightly different as the military was the only ones to use a parking brake with this set-up. This type unit is most commonly found on boat trailers.
If you need parts for the tongue surge brake assembly, contact Mendenhall Industries directly and they will help you get what you need.
Sent from my SM-G970U using Tapatalk
Last edited:
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
The handles were difficult as well until a couple months ago a SS member found a manufacturer for the more recent version, I recall the price being reasonable. (new-new, not NOS) Thats who found the cables. I think. I forget who it was. I helped him find the handles.
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
thanks a lot, i will check it
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
I still can't find the SIN numbers on my handbrake cable, wheel bearing and the rubber plate above the suspension (the both are missing).
Does someone maybe know these numbers?
Juan Prado's TM is here https://www.steelsoldiers.com/threads/tm-9-2330-202-13p-m101-trailer-dec-30-2011-revision.119178/
Many thanks in advance again
Does someone maybe know these numbers?
Juan Prado's TM is here https://www.steelsoldiers.com/threads/tm-9-2330-202-13p-m101-trailer-dec-30-2011-revision.119178/
Many thanks in advance again
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
OK, open up the TM. Go to page 87-2, (PDF page # 41
And you see a picture of the cable. Figure 6, Item #1.
Go to page 87-3, (PDF page # 419) You see THREE cables listed. To know what cable fits your trailer, you kneed to know what UOC, (Useable On Code) the M101A3 has.
Go to page 0081-6, (PDF page # 392) There is a list. The M101A3 has a UOC of TC1. That is your UOC, for your trailer.
Go to page 87-3, (PDF page # 419) The top cable shows:
2530-01-429-8346 92867 15641501 CABLE AND CONDUIT A 74 INCHES LONG
UOC: CT1,TC1 .............................................
This is the cable you want.
2530-01-429-8346 is the NSN, (national Stock number).
15641501 is the part number.
92867 is the supplier of the part to the military.
The rubber bumper is in Figure 18. So, this is a test. You look it up, and post here what you find, so we can see if you understand how to find parts.
If you get this right, then finding the bearing should go easy.
And you see a picture of the cable. Figure 6, Item #1.Go to page 87-3, (PDF page # 419) You see THREE cables listed. To know what cable fits your trailer, you kneed to know what UOC, (Useable On Code) the M101A3 has.
Go to page 0081-6, (PDF page # 392) There is a list. The M101A3 has a UOC of TC1. That is your UOC, for your trailer.
Go to page 87-3, (PDF page # 419) The top cable shows:
2530-01-429-8346 92867 15641501 CABLE AND CONDUIT A 74 INCHES LONG
UOC: CT1,TC1 .............................................
This is the cable you want.
2530-01-429-8346 is the NSN, (national Stock number).
15641501 is the part number.
92867 is the supplier of the part to the military.
The rubber bumper is in Figure 18. So, this is a test. You look it up, and post here what you find, so we can see if you understand how to find parts.
If you get this right, then finding the bearing should go easy.
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
thanks a lot again.
I assume the rubber plate should be 5340-01-147-8290
but i cant find the bearing's NSN yet, i keep on looking
I assume the rubber plate should be 5340-01-147-8290
but i cant find the bearing's NSN yet, i keep on looking
Attachments
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Never assume. Know, or not know. But yes, you are right!
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Look at figure #12. Pages 93-1 and 93-2.
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
Thanks a lot, now I try to order it
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
No, no, no. You don't get off that easy. Tell me the NSN and part numbers of the bearings!!
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
i was wrong, i think it is 3110-00-100-5303 like https://www.globeworks.eu/wheel-bearing-inner-trailer-M101
Attachments
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Perfect Ronald! Now you got this down pat!! I seem to remember that the TIMKEN company supplied this part to us, and strangly enough, for this NSN, I wrote down in my notes the part #: 25580-25520.
Ronald-Holland
Member
- 30
- 11
- 8
- Location
- Holland
thanks a lot, i try to order it, with the other parts, at Easternsurplus, I hope they have them.
What you mean with 25580-25520 ?
What you mean with 25580-25520 ?
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Thats the TIMKIN part number for the bearing you made the red arrow point at. I just looked in German ebay, for timken 25580-25520, and it came up. Might be cheaper for you to look there.