• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

CHUCKY'S TREE HOUSE !

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,251
18,791
113
Location
Charlotte NC
Its not that close ive been on a folding ladder on my tailgate so i could get where i needed to be to cut and drill the doors i just used a rattle can till i need to mix up a whole gun full of paint for other stuff then i will shoot it to match !
.
Good Deal. I was hopeful.
That would have made for a really bad day!

Those vents are neat. They look a lot like what is on the cab of the 929 Series trucks down near your feet. (Rotated 90°) You haven't had any fun until you have a bunch of jack-booted linemen climb in and out of the truck a few dozen times with dirt on their feet. Then some wisenheimer reaches in and opens the vent. At about 25 or 30 miles an hour - the dirt starts floating around. Gets all in your eyes. (we never screwed with each other - ever!)
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
.
Good Deal. I was hopeful.
That would have made for a really bad day!

Those vents are neat. They look a lot like what is on the cab of the 929 Series trucks down near your feet. (Rotated 90°) You haven't had any fun until you have a bunch of jack-booted linemen climb in and out of the truck a few dozen times with dirt on their feet. Then some wisenheimer reaches in and opens the vent. At about 25 or 30 miles an hour - the dirt starts floating around. Gets all in your eyes. (we never screwed with each other - ever!)
I feel sure you wouldnt have any part of that kind of behavior
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,251
18,791
113
Location
Charlotte NC
I feel sure you wouldnt have any part of that kind of behavior
Oh, but they would get their revenge (best served cold). I went down the road from Charlotte to Albemarle to repair a truck. Offloaded the tools and parts onto a Deuce from the service truck. Three of us sitting in a cab with no doors. Meandering slowly down the side of a big hill... Off to the right was a derrick close to the side of the path we were on (not a road). Digger was attached to the boom so they weren't digging. Lifting something - that was some sort of woven cable matt. MUCH bigger than the picture below, but you get the idea...

Wire-Blast Matt.jpg

We got right beside the matt and the guy standing there holding a pair of wires and a D-Cell battery - with a big grin on his face - popped a stick of kinestick off. There was enough concussion that it felt like you had been punched in the chest...

Until that happened, I couldn't figure out why they needed to drive us down the hill. They had planned and schemed to make that happen. Yep, we would definitely mess with each other. Lots of fun to stick a lineman up in the air in his bucket too, then walk away.
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
Oh, but they would get their revenge (best served cold). I went down the road from Charlotte to Albemarle to repair a truck. Offloaded the tools and parts onto a Deuce from the service truck. Three of us sitting in a cab with no doors. Meandering slowly down the side of a big hill... Off to the right was a derrick close to the side of the path we were on (not a road). Digger was attached to the boom so they weren't digging. Lifting something - that was some sort of woven cable matt. MUCH bigger than the picture below, but you get the idea...

View attachment 845257

We got right beside the matt and the guy standing there holding a pair of wires and a D-Cell battery - with a big grin on his face - popped a stick of kinestick off. There was enough concussion that it felt like you had been punched in the chest...

Until that happened, I couldn't figure out why they needed to drive us down the hill. They had planned and schemed to make that happen. Yep, we would definitely mess with each other. Lots of fun to stick a lineman up in the air in his bucket too, then walk away.
I started to say you just descibed a blasting mat and the guy was holding the leads from the shot i used to have to hold the leads on a meter and not take my eyes off the meter when they would be putting blasting mats over the shot and more fill on top of them if they broke a wire in the shot while covering it that spot is where we would have to start digging to rewire the shot ! I really liked the big rock shots the track drillers would drill a half a day then we would load the 2x24 inch sticks of hercules poweder in the hole with pink amonia nitrate then the fines of the drilling were last in the whole to keep the shot from blowing out and coming back up the hole like a shotgun barrel then they would tie all the wires into a stageing board with the different mil a second capps in order then boooom and the orange smoke in the sky for a few minutes i loved that smell
 
Last edited:

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,251
18,791
113
Location
Charlotte NC
I started to say you just descibed a blasting mat and the guy was holding the leads from the shot i used to have to hold the leads on a meter and not take my eyes off the meter when they would be putting blasting mats and more fill on top of them if they broke a wire in the shot while covering it that spot where we would have to start digging to rewire the shot ! I really liked the big rock shots the track drillers would drill a half a day then we would load the 2x24 inch sticks of hercules poweder in the hole with pink amonia nitrate then the fines of the drilling last in the whole to keep the shot from blowing out and coming back up the hole like a shotgun barrel then they would tie all the wires into a stageing board with the different mil a second capps in order then boooom and the orange smoke in the sky for a few minutes i loved that smell
.
Didn't think about that - but those folks with a show to put on - have to have some pretty cool tricks!
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
Painted the bars that hold the doors closed and installed 2 fresh air pop out vents for the interior just haven't put the 383 green on them yet and the vents on the truck cab roof IMG_1548.PNG
 
Last edited:

Third From Texas

Well-known member
2,700
6,312
113
Location
Corpus Christi Texas
Does anyone know where you can find the very top helper leaf in this pic im looking for 2 of em if there not very expensive !View attachment 846980

Try a leaf spring shop (seriously). A flat leaf isn't expensive at all. See if you can find someone locally that makes springs and spring packs. I'm pretty certain CC Spring is still in operation here, but it's Texas. Texas lives on big equipment and shops are everywhere.
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
Try a leaf spring shop (seriously). A flat leaf isn't expensive at all. See if you can find someone locally that makes springs and spring packs. I'm pretty certain CC Spring is still in operation here, but it's Texas. Texas lives on big equipment and shops are everywhere.
Yea you hear folks on here scraping these trucks out i thought i might get lucky and find the real deal but if not we have a big truck pick a part here local and Reworkedlmtv gave me exact measurements yday I guess I could get on the phone next week and call some spring shops and see how much they're talking ! Thanks for the idea !
 

wheelspinner

Well-known member
Steel Soldiers Supporter
3,743
1,504
113
Location
North Carolina - FINALLY !
Yea you hear folks on here scraping these trucks out i thought i might get lucky and find the real deal but if not we have a big truck pick a part here local and Reworkedlmtv gave me exact measurements yday I guess I could get on the phone next week and call some spring shops and see how much they're talking ! Thanks for the idea !
Every 1088 I’ve scrapped out the rear springs were one of the first thing gone.
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
Wanted. Those never make it to the scrapper. Now I am parting out a 1083 and those springs would just be scrap. I wonder if they could be used to supplement what you have ?
I dont know the anwser to that one but im going to start looking at what will do the best job (lol) the cheapest .
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
Is that the truck your looking for?
This is the 2 1/2 ton version of the truck im looking for the helper leaf on the 5 ton version of that truck it would have 3 axles 6x6 . Ive got to figure out what would be the best thing to do . It would be fine just like it is i was just thinking if i stumbled on a set of helper leaves from a 5ton 1088 i would throw em under there ! Thanks for asking .
 

Rhino 5/4

Well-known member
508
1,867
93
Location
Waco, Tx
This is the 2 1/2 ton version of the truck im looking for the helper leaf on the 5 ton version of that truck it would have 3 axles 6x6 . Ive got to figure out what would be the best thing to do . It would be fine just like it is i was just thinking if i stumbled on a set of helper leaves from a 5ton 1088 i would throw em under there ! Thanks for asking .
Ok. I think there is another out at the place j go but don't think it's a 5 ton. I'll look next time.
 

chucky

Well-known member
Steel Soldiers Supporter
6,444
18,473
113
Location
TN .
You are skilled, love your build
Thanks i had my slave strippers do all the work while i mentored them !!!! We are in negotiations with A&E for a new home improvment TV show called THIS OLD GREEN MOBIL BROTHEL everyone should enjoy the unboxing segment of the show ! It aint what your expecting ! Each week we will be broadcasting from one of the SS membership that are curently building a camper and we film for a week at their house with our strippers turned loose in there truck to see how the everybody works together while we get interveiws with the wives and girlfriends on how well they have enjoyed cooking and takeing care of our crew for a week of filming ! Anyone interested leave your name below .
 

Rhino 5/4

Well-known member
508
1,867
93
Location
Waco, Tx
Thanks i had my slave strippers do all the work while i mentored them !!!! We are in negotiations with A&E for a new home improvment TV show called THIS OLD GREEN MOBIL BROTHEL everyone should enjoy the unboxing segment of the show ! It aint what your expecting ! Each week we will be broadcasting from one of the SS membership that are curently building a camper and we film for a week at their house with our strippers turned loose in there truck to see how the everybody works together while we get interveiws with the wives and girlfriends on how well they have enjoyed cooking and takeing care of our crew for a week of filming ! Anyone interested leave your name below .
Pick me,pick me!!! I wanna be first Rhino 5/4 hehehehehe
 

M1078MAN

Well-known member
Steel Soldiers Supporter
672
893
93
Location
SW Va, Roanoke County
Thanks i had my slave strippers do all the work while i mentored them !!!! We are in negotiations with A&E for a new home improvment TV show called THIS OLD GREEN MOBIL BROTHEL everyone should enjoy the unboxing segment of the show ! It aint what your expecting ! Each week we will be broadcasting from one of the SS membership that are curently building a camper and we film for a week at their house with our strippers turned loose in there truck to see how the everybody works together while we get interveiws with the wives and girlfriends on how well they have enjoyed cooking and takeing care of our crew for a week of filming ! Anyone interested leave your name below .
Man tooo slow on the reply, always could use a paint stripper or two I guess sloopy seconds
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks