• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Squibbly's M1009 and other Questionable Projects

Squibbly

Well-known member
408
1,039
93
Location
Alabama
I just actually watched my own "pigtail" making video.
I have no idea why I'm shaking so much. Too much coffee I suppose. 😂😂
Damn...Shakes McGee.

Actually, I have a REALLY bad back, especially in the morning. In order to do half of these jobs, I need to get a lot of adrenaline going. Hanging over the hood for a few hours and having to pull out that rear battery required an extra bit of the "anger" to fill me. That probably added to my shakes. Lol.
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
Rain…no better day than to get this steering column pulled apart (if I can..it looks pretty rusty), and clean it up to replace my existing one.





Assuming I can get the steering wheel off of this one, and the other one once it is out, I’ll swap the shift lever and turn indicator lever. The ones on this are pretty beat.


Sent from my iPhone using Tapatalk
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
Pshh…it was really that easy to get the wheel off??

I knew I was doing it right. I didn’t even mess up the witness mark, and I used the Chinese special puller (with better bolts).

This thing looks way more rusty that mine, and came right off.






Sent from my iPhone using Tapatalk
 

ezgn

Well-known member
650
1,039
93
Location
Lake Elsinore Ca.
I just actually watched my own "pigtail" making video.
I have no idea why I'm shaking so much. Too much coffee I suppose. 😂😂
Damn...Shakes McGee.

Actually, I have a REALLY bad back, especially in the morning. In order to do half of these jobs, I need to get a lot of adrenaline going. Hanging over the hood for a few hours and having to pull out that rear battery required an extra bit of the "anger" to fill me. That probably added to my shakes. Lol.
I would have never said anything, but I did notice it a bit myself. Although a little shaking is quite common in all of us. Thanks for the video.
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
I beat the old column with a sledge once I had it out…not a budge…

Mess with the bull, get the sawzall…

New column is “mostly” in but it got dark.

Stripping the parts off the old column I want.




Sent from my iPhone using Tapatalk
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
A spray bottle filled with ammonia, an old toothbrush and some patience will clean that wheel up like new .
I like things with a bit of dirt and rust on them.

I cleaned it up this good..



Don’t laugh at my car seats. It’s just to cover the ripped up ones until I can get them recovered.

Time to put the dash back together and zip tie the harnesses up.

All my flashers work, horn, high beams, wipers, shift lever.


Sent from my iPhone using Tapatalk
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
Hmmmm…
I just started the truck and realized after I took the key out that it was the key to my old column, and doors.

I just held it up to the key for the new column and it’s the same.

Did the military use the same key for all of these?


Sent from my iPhone using Tapatalk
 

ezgn

Well-known member
650
1,039
93
Location
Lake Elsinore Ca.
I like things with a bit of dirt and rust on them.

I cleaned it up this good..



Don’t laugh at my car seats. It’s just to cover the ripped up ones until I can get them recovered.

Time to put the dash back together and zip tie the harnesses up.

All my flashers work, horn, high beams, wipers, shift lever.


Sent from my iPhone using Tapatalk
Those seat covers go great with your hula dancing girl
Hmmmm…
I just started the truck and realized after I took the key out that it was the key to my old column, and doors.

I just held it up to the key for the new column and it’s the same.

Did the military use the same key for all of these?


Sent from my iPhone using Tapatalk
All the same, so if you need parts just get them from your neighbors cucv until you can pay him back.
 

ezgn

Well-known member
650
1,039
93
Location
Lake Elsinore Ca.
I like things with a bit of dirt and rust on them.

I cleaned it up this good..



Don’t laugh at my car seats. It’s just to cover the ripped-up ones until I can get them recovered.

Time to put the dash back together and zip tie the harnesses up.

All my flashers work, horn, high beams, wipers, shift lever.


Sent from my iPhone using Tapatalk
Good job mister, you're the man!
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,724
19,777
113
Location
Charlotte NC
Hmmmm…
I just started the truck and realized after I took the key out that it was the key to my old column, and doors.

I just held it up to the key for the new column and it’s the same.

Did the military use the same key for all of these?


Sent from my iPhone using Tapatalk
.
It has been said that YES, they are keyed alike.
 

jplace1011

Well-known member
462
489
63
Location
Santa Ana, CA
I like things with a bit of dirt and rust on them.

I cleaned it up this good..



Don’t laugh at my car seats. It’s just to cover the ripped up ones until I can get them recovered.

Time to put the dash back together and zip tie the harnesses up.

All my flashers work, horn, high beams, wipers, shift lever.


Sent from my iPhone using Tapatalk
I noticed your dashboard is gray. My is too, but I thought it was replaced. Did the CUCVs come stock with a gray dash I wonder??


Sent from my iPhone using Tapatalk
 

Squibbly

Well-known member
408
1,039
93
Location
Alabama
I noticed your dashboard is gray. My is too, but I thought it was replaced. Did the CUCVs come stock with a gray dash I wonder??


Sent from my iPhone using Tapatalk
I have a new dash. Haven’t installed it yet.
Not sure if I even will..

It is also grey.

My map lights and rear blackouts are working. Need to do the two front blackouts now.





Sent from my iPhone using Tapatalk
 

jplace1011

Well-known member
462
489
63
Location
Santa Ana, CA
That lighting is a big improvement from stock. Great looking mats, nice to look back and see all the progress.
That’s all looking great!! I wish I had you and Johnny as neighbors. I’d be in CUCV heaven!!

I’ve been in the fence about putting LEDs in the dash. What do you guys think? Any good or bad points about using LEDs?


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks