humvee vic-1 mounting pics needed

[TOM R]

hi all need pics of vic 1 mounted in slant with turret or manual that shows it , pics of he munts helps too

 

[TOM R]

should i have posted in the radio section?

 

[papakb]

Tom, Your request isn't clear and that's probably why there haven't been any answers to it. The VIC-1 intercom amplifier (AM1780) mounts on a plate beneath the radio shellf on it's legs and the cables transition out from there, Now is your request actually how the C-2298 crewmember box mounts in the turret? If so then you'll need to specify which turret you have since there are several different configurations.

Help us help you. A picture of what you have would help.

 

[TOM R]

Tom, Your request isn't clear and that's probably why there haven't been any answers to it. The VIC-1 intercom amplifier (AM1780) mounts on a plate beneath the radio shellf on it's legs and the cables transition out from there, Now is your request actually how the C-2298 crewmember box mounts in the turret? If so then you'll need to specify which turret you have since there are several different configurations.

Help us help you. A picture of what you have would help.

mounting the crew boxes on a 10 series turret and 11 series turret , i dont want to use the rhino mounts , I want to use the mounts that look like a piece of angle

i have A hybrid turret support that I built , fits a 10 series turret in 11 series truck, check it out in the hot rodding section lots of pics

 

[TOM R]

I found this for 10xx series turret support pic on an actual turret would be nice

Also pic of cre box on 11xx turret support